Mr. Ed
MEMBER
PNW
I’m trying to position the overhead flap lever in my experimental scratch built PA18. I’ve tacked it in, sat in the seat and operated the lever. I’m not happy with the lever position with flaps fully extended. It feels like it’s too close to my shoulder. My concern is that moving it closer to the side window will cause inadvertent contact between the throttle and my hand on the flap handle.
What I’m looking for is either: A Carbon cub in my area that I can sit in and actuate the flap handle to see where they positioned the lever. Or, some detailed photos with dimensions that also show the lever position with an occupant in the pilot seat.
Thanks,
Mr. Ed
W52 (Battle Ground, WA)
What I’m looking for is either: A Carbon cub in my area that I can sit in and actuate the flap handle to see where they positioned the lever. Or, some detailed photos with dimensions that also show the lever position with an occupant in the pilot seat.
Thanks,
Mr. Ed
W52 (Battle Ground, WA)