I really like the Stewarts systems. I'm a first time builder, This is my first cover Job. I did take the Polly Fiber course at Sun n fun in 2006. That's my only thing to compare to experience wise. I have watched the videos Stewarts has provided and it pretty much walks you through the entire process. That being said Bill has had answer about 10 phone calls, graciously. I really like how the glue is with Stewarts, it is much easier to deal with because you are not as concerned with the set up time. You just have to make sure you wipe the excess off when doing your final glueing step. not Hard at all. It is allot of work though. When it comes to your project, you can do it. You just have to keep digging. I like what Steve Pearce told me at Graham, "it's like eating an Elephant one bite at a time, Sooner or later you'll get it eaton" I have used the manual, Graham, utube, and followed those builds on this sight. I have been lucky enough to have friends with great knowledge to come in and Give me punch lists and also ding me here and there to keep me on track. You can do it. You have a great frame to Build on. Have a nice evening. Greg