Relocated oil cooler

[BES]

Please can someone help me remember who has an STC for relocating the oil cooler to the rear engine baffle on an O-320-A2A?

I want to install this engine in my PA-12 using the Kenmore STC. The STC says to use a PA-22 nose bowl and leave the oil cooler in place. Firstly I don't like the long tubes going to and from the cooler, secondly I have a new glass fibre PA-18 nose bowl that I want to use.

Thanks!
Bent

 

[MikeJ]

My dad is doing the same thing with our PA-12 right now. We have the Kenmore STC and we mounted the cooler in the right rear baffle. I will check for you and report back as to the paperwork required.

Mike J.

 

[BES]

Thanks. Much obliged!

Bent

 

[Mikey]

I'm at the same point on my -12 using Kenmore's O-320 STC. Would like to keep my clean O-235 nosebowl if possible. Will be interested in the STC details.
Chris
N3719M