• If You Are Having Trouble Logging In with Your Old Username and Password, Please use this Forgot Your Password link to get re-established.
  • Hey! Be sure to login or register!

What is this called?!!!

P

Philly5G

Registered User
England
Can anyone please tell me the correct name for the fitting that's bolted through and sticking up from the Tailwheel steering arms in this pic please? I'd like to order some for my TW and Rudder steering arms, to reduce the vertical angle the TW steering chains are currently in. Are they available in different lengths too?

Screenshot 2019-06-10 at 10.42.27.jpg

Thanks!!!

Philly
 

Attachments

  • Screenshot 2019-06-10 at 10.42.27.jpg
    Screenshot 2019-06-10 at 10.42.27.jpg
    78.8 KB · Views: 497
RaisedByWolves said:
Eye bolts
https://www.aircraftspruce.com/catalog/hapages/eyeboltsan42b.php?clickkey=8738
Cable shackle
https://www.aircraftspruce.com/catalog/appages/an115.php?clickkey=26456
Click to expand...

Thank you!!

They all look to have the same height of drilled plate, so I guess the way to go to make the drilled hole higher from the TW steering arm would be to order the correct overall length and pack out the additional height needed between the base of the drilled plate bit and the steering arm with washers or a tube cut to length?
 
Mike just a threaded end is usually a clevis fork, but not sure on a forked clevis bolt like that with full shoulder.

Similar to lift strut forks.

Sent from my iPhone using SuperCub.Org
 
You must log in or register to reply here.

Similar threads

Darrel Starr
Tailwheel Chain - Quick Links
Replies
16
Views
9K
adamgrenda
A
Lowflybye
Training Wheels or Tailwheels?
Replies
16
Views
5K
Lowflybye
Lowflybye
spinner2
Ski rigging techniques
2
Replies
42
Views
38K
Rick Davis
Rick Davis
Barton
Control stick length
Replies
6
Views
3K
skywagon8a
skywagon8a
J
12/14 rubber landing gear bumpers
Replies
5
Views
3K
PA12driver
PA12driver
Back
Top