C-90 starter

S2D · Jan 6, 2019

What is the shortest Starter made for the C-90? I need 6" or less unless I dishpan the firewall.

Farmboy · Jan 6, 2019

I’m max 5’8. But hard on the useful load.

Sent from my iPhone using SuperCub.Org

BC12D-4-85 · Jan 6, 2019

B&C I was told is shorter than the Skytec on my Taylorcraft. Never had two to compare.

https://www.bandc.aero/pdfs/bc320out.pdf

S2D · Jan 6, 2019

Thanks, that should work.

Sent from my E6810 using Tapatalk

BC12D-4-85 · Jan 6, 2019

I can't find the dimensions of the Skytec online. It's -38F or I'd go and measure mine. But someone I know facing the same issue recommended the B&C.

Gary

S2D · Jan 6, 2019

Just measured the skytec in a champ. It measures 7"

Sent from my E6810 using Tapatalk

cubdriver2 · Jan 6, 2019

Brian, I just braved the snow and cold and went out to the hangar and uncovered the engine and got the measurements for you. B&C looks to be 5 3/4 max from acc case to bearing bump on back of starter. My 0200 has plenty of clearance on swing out mount

Glenn

BC12D-4-85 · Jan 6, 2019

S2D said:
Just measured the skytec in a champ. It measures 7"

Sent from my E6810 using Tapatalk

Thanks for the check now we know the lengths.

Gary

S2D · Jan 6, 2019

cubdriver2 said:
Brian, I just braved the snow and cold and went out to the hangar and uncovered the engine and got the measurements for you. B&C looks to be 5 3/4 max from acc case to bearing bump on back of starter. My 0200 has plenty of clearance on swing out mount

Glenn

Thanks Glenn. Mine isn't a swing out but should work.

Sent from my E6810 using Tapatalk

Steve Pierce · Jan 6, 2019

I put one on a short mount on a Taylor craft and the B&C starter was the only one that fit, Sky-Tec was to long.

C-90 starter

Montana

Middlebury, VT

Fairbanks, AK.

Montana

Fairbanks, AK.

Montana

upstate NY

Fairbanks, AK.

Montana

Graham, TX

Similar threads