texmex
MEMBER
Hanging Rock, Australia.
What do you mean when you say "blanks"?
If I was disconnecting some of the primer lines, I would remove the tubing and install a plug at the distributor manifold.
Some people might go the quick and dirty route, and just pinch the tubing flat at either end.
Sorry it's been a few days. But this afternoon I pulled the nozzle out from number three cylinder.
Note the six way fuel priming distribution block. And in particular the line running to number three cylinder.
And when the nozzle is pulled out you can see it's been plugged. The same with number 4 cylinder. I know of this because recently I put six overhualed cylinders on the engine.
But why? I have no idea.