O-290-D2 cylinders

[JeremyLee89]

Anyone have an idea on where I can find to repaired/overhauled 0-290-d2 cylinders?
I’ve got cracks in the inside near my exhaust flange and my normal cylinder place doesn’t have any to repair.


Sent from my iPhone using SuperCub.Org mobile app

 

[Cub Builder]

I've heard LyCon may have some. They are pretty scarce. Best if you can find a cylinder shop to weld them in a reasonable time frame.

-Cub Builder

 

[Steve Pierce]

I would check every cylinder shop out there. They are getting to be like hen's teeth.
Sal's Cylinders 972-346-3339
https://gibsonaviationok.com/

 

[JeremyLee89]

I would check every cylinder shop out there. They are getting to be like hen's teeth.
Sal's Cylinders 972-346-3339
https://gibsonaviationok.com/

I did check Gibson. They only had one.


Sent from my iPhone using SuperCub.Org mobile app

 

[Kent Sorensen]

I have one. Don't need it anymore.

 

[JeremyLee89]

I have one. Don't need it anymore.

Give me a call when you can 4342226971


Sent from my iPhone using SuperCub.Org mobile app

 

[flynlow]

I have a 0-290 125 1700 hours total time sitting in my hangar.
I updated to 0320.
It was running fine when pulled.


Sent from my iPhone using SuperCub.Org

 

[Charlie Longley]

I have a 0-290 125 1700 hours total time sitting in my hangar.
I updated to 0320.
It was running fine when pulled.


Sent from my iPhone using SuperCub.Org

Pretty sure those cylinders don’t fit on a D2.

 

[flynlow]

I wasnt sure if just pistons or different cylinder??


Sent from my iPhone using SuperCub.Org

 

[Charlie Longley]

I wasnt sure if just pistons or different cylinder??


Sent from my iPhone using SuperCub.Org

I think probably both, but you would have to look at a parts manual.