Widebody with 3" extended gear shock strut length question

[Grant]

It appears the strut length is too short because the gear has too much positive camber. Thats the only thing I can imagine would be causing this. Surely I'm not the first person with a widebody and extended gear.... It makes sense but I just did not think about it when I ordered the 3" gear and struts.

Setup

Widebody (Dakota Cub)
Widebody Cabane V (Dakota Cub)
3" Extended Gear (F.A.D.)
3" Extended Struts (F.A.D.)
Hydrasorbs​

So the question is.... Is there a 3" extended, Widebody strut that I should have and if so who makes it? I looked at Airframes, Dakota, and F.A.D.

 

[Trimcable]

You might try picking the plane up, if you have lifting tabs, and set the camber that you want and measure the needed strut length. I wonder if it would be close to PA-12/18 gear 3” extended strut length. I have a pair that I could measure to give you an idea if that is even close.


Sent from my iPhone using SuperCub.Org

 

[Steve Pierce]

What does Dakota Cub say? I have never heard of a wide body shock strut. Pictures?

 

[Grant]

What does Dakota Cub say? I have never heard of a wide body shock strut. Pictures?

Steve, Mike mentioned a "Widebody Extended Gear Strut." However, its just the bare fuselage sitting on the gear so it may be just an illusion but it still seems like too much. Can someone measure a 3" Strut from hole to hole for me? Just the strut, Not the hydrasorb. - Thanks. I guess it is possible that Atllee sent standard struts.

Thanks Fellas!

 

[Steve Pierce]

I have a wide body Airframes Super Cub in the hangar I will measure.

 

[stewartb]

Add 300# on the nose and see if that levels it out. You're approx 800# under the typical weight that suspension is designed for.

 

[Trimcable]

If it is any help, PA-12 standard gear shock strut is 18 1/8" C to C and PA-12 3" extended gear shock strut is 20 11/16" C to C. This is the PA-12 with PA-18 gear configuration.

 

[Crash Jr.]

Airframes does make a 3" extended, 4" widebody shock strut. AF12844-43 measures 20.625" eye to eye. Hopefully that helps.

I'm not sure if it would work on a Dakota fuselage with Dakota cabane and Atlee gear. Airframes and Atlee gear use different axle inboard end lengths so the shock struts are normally not compatible from one brand to another.

 

[Steve Pierce]

Looks.like 32" on shock strut length on this Airframes wide body.


9" from belly stringer to center of the cabinet vee to strut attach bolts.

 

[skysigns]

in talking to brain at Dakota cub on atlee's 3" gear struts should be 21" 1/16 with Hydrasorbs 32" 9/16