• If You Are Having Trouble Logging In with Your Old Username and Password, Please use this Forgot Your Password link to get re-established.
  • Hey! Be sure to login or register!

PA-12 engine bushings

aztecf

Registered User
MPLS, MN
I have a PA-12 with original long engine mount, with a O-320-A2B installed under the Kenmore STC. Could someone tell me what the part number would be for the rubber bushings between the engine and mount. Also what the torque specs are on the bolts/nuts that go thru that bushing

Thanks Jeff
 
The Lycoming part number for the bushings is 71032. The manuals say 40 inch pounds and the drawing says comress the rubber to 1.840 inches.

eng_mt_bushing.jpg
 
The above drawing is for a Clipper or a Pacer. The dimension for the bushings are the same but the bolt length might be different.
 
Back
Top