Marty57
PATRON
Nipomo, Ca
I’m not sure how this compares, but I weighed my 2+2/PA14 frame. I have left and right doors, X brace up top, reinforced tail, all door sheet metal, stringer supports, birdcage etc finished. No tail feathers or rudder. The only thing left is to weld on is some tabs for interior panels and pulley mounts. Using two bath scales, the weight with about 4 feet of 2x4 supports up front and a caster wheel at the back is 125 lbs. The interior width of the 2+2 is 39” up front, and about 35" at the front of the "D" side windows. I will be using stock 18 gear and tail feathers with stock jack screw trim and flaps. Any idea how this compares to the four-place SC?
Marty57
Marty57