• If You Are Having Trouble Logging In with Your Old Username and Password, Please use this Forgot Your Password link to get re-established.
  • There is no better time to show your support for SuperCub.Org than during our annual calendar campaign! All the details are HERE

Dzus fastners for pa-12 cowl

QcHunt

Registered User
Hi all,
I have to redonne my cowl on my 12 for airglide skis (bungee tabs on engine mount) so
Time for dzus fastners.
Want install Wings style dzus.
Anybody have done this before?
1000002288.jpg
 
Lower cowl charnels have been moved and Doors shortened. I can reinstall original fastners but looking for différent stile dzus.1000002280.jpg1000002281.jpg
 
Installation is easy. Part numbers baffle me.

We have a CC 180 Cub with a bad cowl fastener. Looks just like your picture. I asked CC for the part #, but no response.
 
DFCI Solutions got bought by Southco. MilSpec Products Inc in Sorrento FL had a lot of that stuff, their version was called Z-Lock. I use it in the pA16 cowls and is the same as the PA12. Dzus numbers were FA6.5. Columbia Airmotive in Troutdale, OR was a source for FA6.5 studs and GF6.5 grommets.
 
I haven't been down this rabbit hole in a while but Googling the above might help. I have collected a lot of the flush head studs, grommets and receptacles a long with new and old tools for dimpling and installing them over the years. PXL_20241010_140221720.jpgPXL_20241010_134712818.jpgPXL_20241010_134728091.jpg
 
Back
Top