• If You Are Having Trouble Logging In with Your Old Username and Password, Please use this Forgot Your Password link to get re-established.
  • There is no better time to show your support for SuperCub.Org than during our annual calendar campaign! All the details are HERE

Best snowshoes for ski flying

Narwhal

PATRON
ANC
Ok, I realize here won’t be one best shoe for all conditions, but I was thinking of buying a set from mane snowshoes.

http://www.mgsnowshoes.com/Products2.html

Does anyone have any idea which model would be most appropriate to assist in ski operations in a PA18?

I don’t even have a cub yet, but am wanting to learn snowshoeing and at least a modest amount of winter bushcraft before I endeavor further. I have a set of cheap aluminums in the current Cessna trike that I fly, to satisfy the legal requirements in AK.

I am a bigger guy, 230+ but most of mane’s models accommodate that. I envision mostly landing on frozen lakes but eventually would like to do some glacier flying (Anchorage). I understand that stamping out a runway and ramps is often required, does a wider, bear paw type shoe favor that kind of activity?

I took a ski flying lesson in a PA18 but we didn’t get out of the airplane off airport. It seemed like the ultimate fun though.
 
Been discussed before if you care to search. I prefer synthetic decks on aluminum frames. Overflow pops right off them. Easy to use bindings are great, too. I have Tubbs and Atlas shoes and prefer the Atlas for the bindings. I also have some cheaper shoes from AIH. No surprises, you get what you pay for. Add some collapsible poles. Snowshoeing is way better with poles. And a dog.
 
As reference, the vast majority of my ski flying was in interior Alaska, where snow can be deep, and generally fluffy.....but not always.

Snowshoes can come into play in a couple different ways.

As you noted in your first post, stamping out a track to enhance takeoff performance is a very important function for snowshoes. In that role, any BIG shoe works. The really long "Alaskan" model shown on that web site would work well, but those shoes are often so long they don't fit well in/on a plane. Very large bearpaw snowshoes can work in that environment as well, and fit inside an airplane a bit easier. And, you're generally going to be in an open area tramping out a track, so it's a back and forth deal. The bearpaws work a little easier than big long trail models there.

Second important role for snowshoes is in a survival situation. Again, the snowshoes you have with you at the time are the ones that work best....obviously. But, again, working around camp, bear paw shaped shoes work well, since those long tails on the trail shoes impede turning.

BUT, Bearpaw shoes also tend to be wider, with less surface area overall, so less floatation....maybe, depending on what you're comparing them to. But, to get equivalent floatation, bearpaws have to be a little wider, which, if you've not done a lot of snowshoeing, is very awkward, at least initially.

My all time favorites, which I still have, are aluminum frame Tundra shoes, which have a poly webbing. They are VERY long, bearpaw shaped shoes. The float really well, and as Stewart noted, overflow doesn't freeze to them nearly as bad as those wood/babiche type shoes.

But, whatever you do, if you're actually going to use the things, get a good, big set, that matches your weight. Otherwise, you may as well just post hole it.

MTV
 
Been discussed before if you care to search. I prefer synthetic decks on aluminum frames. Overflow pops right off them. Easy to use bindings are great, too. I have Tubbs and Atlas shoes and prefer the Atlas for the bindings. I also have some cheaper shoes from AIH. No surprises, you get what you pay for. Add some collapsible poles. Snowshoeing is way better with poles. And a dog.

ok thank you. My instructor told me that the traditional type shoes were best, so it’s good to hear a different opinion. I have no knowledge or opinion of my own.
 
As reference, the vast majority of my ski flying was in interior Alaska, where snow can be deep, and generally fluffy.....but not always.

Snowshoes can come into play in a couple different ways.

As you noted in your first post, stamping out a track to enhance takeoff performance is a very important function for snowshoes. In that role, any BIG shoe works. The really long "Alaskan" model shown on that web site would work well, but those shoes are often so long they don't fit well in/on a plane. Very large bearpaw snowshoes can work in that environment as well, and fit inside an airplane a bit easier. And, you're generally going to be in an open area tramping out a track, so it's a back and forth deal. The bearpaws work a little easier than big long trail models there.

Second important role for snowshoes is in a survival situation. Again, the snowshoes you have with you at the time are the ones that work best....obviously. But, again, working around camp, bear paw shaped shoes work well, since those long tails on the trail shoes impede turning.

BUT, Bearpaw shoes also tend to be wider, with less surface area overall, so less floatation....maybe, depending on what you're comparing them to. But, to get equivalent floatation, bearpaws have to be a little wider, which, if you've not done a lot of snowshoeing, is very awkward, at least initially.

My all time favorites, which I still have, are aluminum frame Tundra shoes, which have a poly webbing. They are VERY long, bearpaw shaped shoes. The float really well, and as Stewart noted, overflow doesn't freeze to them nearly as bad as those wood/babiche type shoes.

But, whatever you do, if you're actually going to use the things, get a good, big set, that matches your weight. Otherwise, you may as well just post hole it.

MTV

wow, fantastic information as always, thank you. Is this the shoe you like? https://hostelshoppe.com/collection...rthern-lites-tundra-speed-snowshoe-gray-black
 
Great advice from above.

Let me add some more insight, and some thoughts from here in wet snow country:

Width of snow shoes means walking with your legs wider- after very long some people's hips hurt from that- hence where narrower shoes come into play.

Let me vote again for aluminum shoes with some type of non-rawhide webbing. I love our old wooden/rawhide shoes I grew up using, they are on the wall if I need them. When ski flying some days those would have been the cat's meow!

Then there are the other days, the ones where you question your sanity in getting involved with aircraft and skis.

A couple of examples: Landed on a polished ice lake surface. stepped out and promptly found myself studying the under side of the aircraft, the very large natural ice surface resting against my back and posterior prevented bruising other than my pride. Solution: took out my Sherpa snowshoes with large ice cleats and put them on to grip the ice.

Landed on a lake trapping and as I crossed I started post holing the top ice, sinking to my knees in water. Put shoes on and went across without further issue. However, the water logged snow on the surface of the ice froze to the snowshoes, creating a very large ice cube on each foot. Solution- take the axe and beat the ice off the snowshoes; (please note this is not a good practice for wooden framed shoes and rawhide web).

Stuck in overflow. Hours and hours of walking up and down the lake to pack the snow down and expose the water to allow it to freeze. After a couple passes the snowshoes begin to collect ice on them, and bindings start to freeze up. Solution: find bindings that are suitable to be beat on and ice scratched off, and are easy to use.

I have three or four brands and styles of snowshoes. Each have their good, each their bad. I weigh about 210, and carry a set of MSR shoes on the sleds- great for cutting trails.

Couple tips: Keep your snowshoes outside of the cabin, or where they won't warm up. Door side of the struts fyi for ease to get to. If they are warm they might pick up more ice.

Carry string with you to tie to the front or back of your shoes, especially of wearing bear paw flat shoes. Put the string on for going downhill to assist lifting the fronts; or you can put it to the back and lift the back for going backwards.

As said above: Ski poles are a BIG improvement, and the Dog is also a great addition. A nice warm cabin with good friends at the end of the journey is also an encouraging item!
 
I've got about 5 sets of snowshoes from 60" long big shoes to all plastic and an aluminum framed bear paw style. But my go-to shoe seems to be the traditional ash frame bear paw style. I just like them.

IMG_8939.jpg

This was a crusty snow from a couple of weeks ago. But for me they work well in deep powder too. I used to carry them on the strut before I had a pod. Poles are a near must when going up or down hill and crossing blowdowns and other stuff in the trees. These are just an old set of downhill ski poles.

The forecast is for a fresh foot in this country in the next couple of days. I'll go back when the weather clears.

IMG_8917.jpg

Stumbling through stuff like this would be a pain with long shoes.

IMG_8933.jpg

Worth the walk.
 

Attachments

  • IMG_8939.jpg
    IMG_8939.jpg
    109.1 KB · Views: 207
  • IMG_8917.jpg
    IMG_8917.jpg
    172.1 KB · Views: 190
  • IMG_8933.jpg
    IMG_8933.jpg
    176.8 KB · Views: 204
I thing you can reach both rudder and heel brakes with these ;-)

Screenshot_20210205-124909.png

Glenn
 

Attachments

  • Screenshot_20210205-124909.png
    Screenshot_20210205-124909.png
    343.5 KB · Views: 193
www.snowshoe.com

I really like the Ojibwa style over the modern types, bearpaws or Alaskans. The shape lets them step over each other without being bow legged. The pointed bows ride on top of deep power or crust better, and cut through brush or cat tails. If you get them here you can save some money buying the kit, and learn a new bushcraft skill sitting in front of the fire at night building them.
 
What I have for plane one source > https://colemans.com/snowshoes-g-i-magnesium-and-binding-combo > and some comments > https://bushcraftusa.com/forum/threads/army-magnesium-snowshoes-opinions.82741/

They have raised bottom ridges to catch ice somewhat and fit large winter boots. Bindings are always a test and try to get a good fit. The magnesium can be scraped off (mainly from the tail) and with a knife against the metal sparks can be generated to start (maybe) a fire on dry fine material (https://www.youtube.com/watch?v=rkbdKM01s-c).

Gary
 

Attachments

  • p-10785-0812.jpg
    p-10785-0812.jpg
    6.8 KB · Views: 153
Last edited:
Like most things there really isn't a one size fits all conditions snowshoe. If you are wanting a shoe for when you land and the powder snow is up to your kazoo and you need to stomp out a runway you will need a shoe with as much surface area as possible and this is where the Alaska trail models come in. I don't know about the military surplus metal ones but I imagine they are strong and light. Iverson Snowshoes are made in Michigan and they have several models including 12x60 and 10x60 Alaska Trail. While the rawhide lacing looks good over the fireplace, they have the option of neoprene webbing that lasts longer and the snow bounces off. For a binding you don't want any buckles. There is a "Bob Maki" model binding made out of rubber that pulls over your boot. These can also be made our of inner tubes and have no buckles. They can also be made large enough to pull over a bunny boot and you can take them on and off with frozen fingers or when wearing mittens.

The Alaska Trail models however are not what you want on the trap line or in trees or hard surfaces. For that the newer styles are superior. I think think the old Sherpa brand was the best but they are not available any more. They had a good binding, were rugged and had a claw on the bottom that works well for ice and hard snow. Now I think the MSR models are pretty good with the plastic models providing good value and flotation. For snowshoe sizing the Sherpa company stressed that it was better to have a model that was a little small and that maybe sunk into the real powdery snow a bit than have a model that was too big and required you to ALWAYS be lugging around the extra weight of a larger shoe in any condition. Overall there would be less energy expended. These smaller ones are great for walking back out on your snowmachine track or among trees but again would not be ideal for packing down that runway in deep powder snow.

Another hint is you better dress in layers especially if you are wearing those bunny boots packing down your runway. Unless you are wearing nothing more than gym shorts you are going to get very warm in a hurry. You don't want to pack down that runway only to freeze to death in a perspiration induced block of ice after you stop moving.
 
Like most things there really isn't a one size fits all conditions snowshoe. If you are wanting a shoe for when you land and the powder snow is up to your kazoo and you need to stomp out a runway you will need a shoe with as much surface area as possible and this is where the Alaska trail models come in. I don't know about the military surplus metal ones but I imagine they are strong and light. Iverson Snowshoes are made in Michigan and they have several models including 12x60 and 10x60 Alaska Trail. While the rawhide lacing looks good over the fireplace, they have the option of neoprene webbing that lasts longer and the snow bounces off. For a binding you don't want any buckles. There is a "Bob Maki" model binding made out of rubber that pulls over your boot. These can also be made our of inner tubes and have no buckles. They can also be made large enough to pull over a bunny boot and you can take them on and off with frozen fingers or when wearing mittens.

The Alaska Trail models however are not what you want on the trap line or in trees or hard surfaces. For that the newer styles are superior. I think think the old Sherpa brand was the best but they are not available any more. They had a good binding, were rugged and had a claw on the bottom that works well for ice and hard snow. Now I think the MSR models are pretty good with the plastic models providing good value and flotation. For snowshoe sizing the Sherpa company stressed that it was better to have a model that was a little small and that maybe sunk into the real powdery snow a bit than have a model that was too big and required you to ALWAYS be lugging around the extra weight of a larger shoe in any condition. Overall there would be less energy expended. These smaller ones are great for walking back out on your snowmachine track or among trees but again would not be ideal for packing down that runway in deep powder snow.

Another hint is you better dress in layers especially if you are wearing those bunny boots packing down your runway. Unless you are wearing nothing more than gym shorts you are going to get very warm in a hurry. You don't want to pack down that runway only to freeze to death in a perspiration induced block of ice after you stop moving.

That right there is great advice, folks!

MTV
 
Ok, I realize here won’t be one best shoe for all conditions, but I was thinking of buying a set from mane snowshoes.

http://www.mgsnowshoes.com/Products2.html

Does anyone have any idea which model would be most appropriate to assist in ski operations in a PA18?

I don’t even have a cub yet, but am wanting to learn snowshoeing and at least a modest amount of winter bushcraft before I endeavor further. I have a set of cheap aluminums in the current Cessna trike that I fly, to satisfy the legal requirements in AK.

I am a bigger guy, 230+ but most of mane’s models accommodate that. I envision mostly landing on frozen lakes but eventually would like to do some glacier flying (Anchorage). I understand that stamping out a runway and ramps is often required, does a wider, bear paw type shoe favor that kind of activity?

I took a ski flying lesson in a PA18 but we didn’t get out of the airplane off airport. It seemed like the ultimate fun though.

I live in Maine about 5 miles from the spot where these are manufactured. They are built by contract by the local minimum security prison inmates, and sold by Maine Guide snowshoes. Pre covid I used some of those guys on a work release
I know the guys that are involved with building the snowshoes are very talentd and take great pride in their construction. They harvest the hardwood onsite, saw and plane and steam bend the frames.

I have a set of Rabbit hunters, I think they are 11 wide and 42 long with upturned ends. They are really good, but were designed to be able to turn around in heay brush with upturned ends.
Most of he snowshoeing we did in the cub was strait line walking, where narrow long tails work bettter
My cub is in a place this winter where I havent been needing snowshoes. Id be happy to fedex you the pair I have it you would like to try them, send em back in the spring
send me your address at jimcrane04435@gmail.com

jim
 
I'm old school. I use my "bear paws" (no tail), a traditional pair (wood and cat gut) on our family maple syrup operation and flying. My current pair was acquired in 1986. They are a design from the 30s. You do need to varnish them every five years or so. In these parts the tradition is to lash same to the struts, ala Glenn G. I don't dare to.
 
Those look pretty much useless.

This style of shoe, may look goofy but are purpose built for backcountry travel in steep terrain, exaggerated cleats for travel in inclined frozen snow or wind slab.
Depends on your mission. Not applicable here though
 
I live in Maine about 5 miles from the spot where these are manufactured. They are built by contract by the local minimum security prison inmates, and sold by Maine Guide snowshoes. Pre covid I used some of those guys on a work release
I know the guys that are involved with building the snowshoes are very talentd and take great pride in their construction. They harvest the hardwood onsite, saw and plane and steam bend the frames.

I have a set of Rabbit hunters, I think they are 11 wide and 42 long with upturned ends. They are really good, but were designed to be able to turn around in heay brush with upturned ends.
Most of he snowshoeing we did in the cub was strait line walking, where narrow long tails work bettter
My cub is in a place this winter where I havent been needing snowshoes. Id be happy to fedex you the pair I have it you would like to try them, send em back in the spring
send me your address at jimcrane04435@gmail.com

jim

DSCN2248.JPG

That's the make of these shoes. This is their Alaska model. They're big shoes but offer a lot of floatation. I really like the bindings.

DSCN2242.JPG

DSCN2241.JPG
 

Attachments

  • DSCN2248.JPG
    DSCN2248.JPG
    263.6 KB · Views: 189
  • DSCN2242.JPG
    DSCN2242.JPG
    251.7 KB · Views: 170
  • DSCN2241.JPG
    DSCN2241.JPG
    259.5 KB · Views: 182
Last edited:
View attachment 54021

That's the make of these shoes. This is their Alaska model. They're big shoes but offer a lot of floatation.

Is that a carbon cub factory belly pod (I don't know what vendor they use)? Do those skis fit in the pod?

I have been following your post here and on cc forum. Very jealous! FX3 with summits is what I envision for myself, despite most peoples' advice against penetration skis.
 
Is that a carbon cub factory belly pod (I don't know what vendor they use)? Do those skis fit in the pod?

I have been following your post here and on cc forum. Very jealous! FX3 with summits is what I envision for myself, despite most peoples' advice against penetration skis.

This pod is from Carbon Concepts. And yes, the big Alaskan snowshoes will fit in it too. I think CC is offering the Lewareo pod.

The picture below shows the Carbon Concepts straight skis. These are real performers. The tall pedestal puts the axle height almost the same as 31” Bushwheels. My penetration skis are Airglas LW2500s.

121CBC3A-6C00-439A-BCC2-C7A1FCE419E8.jpeg
 

Attachments

  • 121CBC3A-6C00-439A-BCC2-C7A1FCE419E8.jpeg
    121CBC3A-6C00-439A-BCC2-C7A1FCE419E8.jpeg
    270.2 KB · Views: 203
This style of shoe, may look goofy but are purpose built for backcountry travel in steep terrain, exaggerated cleats for travel in inclined frozen snow or wind slab.
Depends on your mission. Not applicable here though

There are quick attach tails that extend the MSR type deck to almost double the length. They work really good and easy to turn and deal. Packing a strip they would be narrow, but for day to day trapping they are a great shoe. You can even ride a sled down the trail with them on!
 
My snowshoes are made for worst case. I'd appreciate some small ones that were just enough to prevent post-holing but no way would I carry them for unseen emergencies. My shoes are big and the bindings incorporate aggressive crampons. Sometimes they're more than consitions require but that's way better than almost good enough.
 
77EF74DF-98EA-4C6E-8082-49FEB466A1A2.jpg5’ George Albert snowshoe he has a 6’ also
 

Attachments

  • 77EF74DF-98EA-4C6E-8082-49FEB466A1A2.jpg
    77EF74DF-98EA-4C6E-8082-49FEB466A1A2.jpg
    59.2 KB · Views: 261
We had one good day for flying this week and I was able to get out. We had a good stretch of below zero temps and a lot of snow in the mountains. I anticipated good powder conditions and brought the big 5’ shoes.

F15986D3-063E-490A-B0B7-A0F0B5C7D0EA.jpeg

I was glad I’d brought them. When I stepped out of the plane it was like stepping into thigh-deep water. I’d been to this same area earlier in the winter and at that time it was a 2’ layer with a crust on top. Now there’s another 2+ feet of powder on top of that base. Notice the LW2500 skis are under the surface too.

2EB5EB15-C92C-4761-A626-8A89DC9BD2C7.jpeg

In these conditions a big snowshoe is really appreciated. So is a tail ski.

I wear wool pants when out like this and snow gaiters. And ski poles help too. I like 🥶 winter.
 

Attachments

  • F15986D3-063E-490A-B0B7-A0F0B5C7D0EA.jpeg
    F15986D3-063E-490A-B0B7-A0F0B5C7D0EA.jpeg
    239.6 KB · Views: 197
  • 2EB5EB15-C92C-4761-A626-8A89DC9BD2C7.jpeg
    2EB5EB15-C92C-4761-A626-8A89DC9BD2C7.jpeg
    277.2 KB · Views: 165
Back
Top