Anybody in ANC with a Husky?

[algonquin]

Hi Guys anybody with a Husky that I could trace the rudder profile from. I'm repairing a crunched rudder on my Husky and the top is mashed in. I need to replace the tubeing on the top. I'm not sure it the PA-18 rudder is the same, there are a couple in our village. I'll be up in ANC this weekend thank, Tom

 

[mvivion]

Hi Guys anybody with a Husky that I could trace the rudder profile from. I'm repairing a crunched rudder on my Husky and the top is mashed in. I need to replace the tubeing on the top. I'm not sure it the PA-18 rudder is the same, there are a couple in our village. I'll be up in ANC this weekend thank, Tom

Stop by OAS on Lake Hood, next to DOT. They may have one parked on the ramp.

MTV

 

[G44]

Tom, if you don't have any luck let me know and I will trace mine out on paper and mail it to you.

Kurt

 

[algonquin]

Thank you Mike and Kirt. They are just a little different than cubs in a lot of ways. Although when repairing the wings the inside braces say " Piper aircraft corp", lol.