• If You Are Having Trouble Logging In with Your Old Username and Password, Please use this Forgot Your Password link to get re-established.
  • There is no better time to show your support for SuperCub.Org than during our annual calendar campaign! All the details are HERE

Aeroski R-2800

Also the stub axle may be designed for the 1 1/4 inch landing gear, you may want to confirm it will fit into the 1 1/2 inch properly
 
You may need to have axles made for your install (every gear seems to have a bit of a different inside diameter) Troy is super good to deal with.

If the Tire is not centre it is an issue with the installation of the axle and bracket, that is a bit of a pain to get perfect.

I done a few and you need to take your time and sometimes be a bit creative to get it right

This is why Air Glass will only allow Attlee to do the ski axle mods on their set up on a Jig so every one fits perfect.
 
Back
Top