Somebody school me. My prop instructions say to torque in three stages to 55#ft. Simple enough, except invariably 5 of the 6 bolts will have the safety wire channels pointed in an impossible direction to wire. On the first bolt I'll turn the bolt back to pull the wire, re-torque, measure and twist to the second bolt, turn that bolt back to pull the wire, re-torque, then finish the twist and tuck the pigtail. Sound easy enough but it's a sucky job to do in the restricted space around the hub. What do you other guys do? Any hints to pass along? Do you manually twist the second bolt or are you using LH twist pliers?