Thanks Thanks:  0
Results 1 to 5 of 5

Thread: Garmin 275

  1. #1

    Join Date
    Aug 2019
    Posts
    2
    Post Thanks / Like

    Garmin 275

    Has anyone installed a GI 275 ADI in a Cub? Iím concerned about the depth of the instrument with the front frame and therefore where it will end up in the panel. Iím trying to keep a 6 pack. Thanks

  2. #2
    wireweinie's Avatar
    Join Date
    Aug 2013
    Location
    Palmer, AK
    Posts
    4,849
    Post Thanks / Like
    You should be able to measure or mock something up. If you stay away from the very center of the panel it should fit most places.

    Web
    Attached Files Attached Files
    Life's tough . . . wear a cup.

  3. #3

    Join Date
    Aug 2019
    Posts
    2
    Post Thanks / Like
    Quote Originally Posted by wireweinie View Post
    You should be able to measure or mock something up. If you stay away from the very center of the panel it should fit most places.

    Web
    Thank you very much for the diagram! I had the measurements but that does help. I was hoping to put it in the upper center but I know the frame drops down from the top of the panel. Im thinking the mock up is best to proceed at this point for fit.

  4. #4
    wireweinie's Avatar
    Join Date
    Aug 2013
    Location
    Palmer, AK
    Posts
    4,849
    Post Thanks / Like
    Mock up with a tag board 'instrument'. It lets you visualize locations.

    Web
    Life's tough . . . wear a cup.
    Likes jrussl liked this post

  5. #5
    Grand Pooh Bah soyAnarchisto's Avatar
    Join Date
    Aug 2012
    Location
    Boulder, CO
    Posts
    740
    Post Thanks / Like
    CAD = cardboard aided design
    Likes wireweinie, hotrod180 liked this post

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •