RaisedByWolves
FRIEND
Tx
hey guys,
I have a 18-125 that was upgraded to the higher gross weight via borer STC. The stc says to ream the fuselage fitting to 5/16. Problem is the HD atlee V hits the fuselage before the holes line up. I was wondering if the univair is smaller on the top? I have another V but dont know if it's HD or not, it is the same as the HD. I looked up 30602-007 the cabane v in the piper drawings, on supercubdrawings and northland but it appears to be the smaller J3 1/4" bolts. Does anyone have the bigger V drawing? I'm curious to see if that will fit.
http://www.supercubproject.com/drawings/pdfs/A3310110.pdf
Thanks
Tom
I have a 18-125 that was upgraded to the higher gross weight via borer STC. The stc says to ream the fuselage fitting to 5/16. Problem is the HD atlee V hits the fuselage before the holes line up. I was wondering if the univair is smaller on the top? I have another V but dont know if it's HD or not, it is the same as the HD. I looked up 30602-007 the cabane v in the piper drawings, on supercubdrawings and northland but it appears to be the smaller J3 1/4" bolts. Does anyone have the bigger V drawing? I'm curious to see if that will fit.
http://www.supercubproject.com/drawings/pdfs/A3310110.pdf
Thanks
Tom