So......
Is it time for Mike to be back at this site???
Sure miss his knowledge
Mike Come Back
So......
Is it time for Mike to be back at this site???
Sure miss his knowledge
Mike Come Back
I agree, the site's not the same without him...
CharlieN thanked for this post
I noticed his absence, gotta be a back story I missed. His hints and tips and tool thread was/is awesome.
Mike marches to a different drummer. He is missed.
"Put out my hand and touched the face of God!"
Mike is content to let a world that can’t handle his no-baloney, call-it-like-I-see-it approach move on without him. And this site is the worse for it...
This site and the world needs more men like Mike.
CharlieN thanked for this post
One of the guys here whose opinion was based on more than opinion. Can we pay him to come back?
He deserves time here at his shop rate-same for others in the trades
Gary
Dave Calkins thanked for this post
Mike is intolerant to censorship. He left here and Facebook on about the same day but he’s doing fine.
Guys who can tune out the noise enjoy the music. There’s a lot to be said for that.
SJ thanked for this post
I went through that with the Avid and kitfox forums. Started my own many years ago now (I think 08 or 09) and as of today I think I have moderated 3 posts. I detest censorship and find its much better to let the members sort out the BS and hand out to the beat downs to the folks that need it. It has worked exceptionally well.
Huge loss to this website imho. Probably the single most helpful member on mechanical questions......(like 17,000 of them) loosing Mike, is like Bob Hoover not showing up for the airshow. He would not hold still for censorship, and
Was not going to put up with it. I take my hat off to him. He was big part of this site. If you believe in TikTok and letting the IRS probe into your financial affairs ( being floated around under our government at the moment)
Your not going to miss Mike. If your man enough to question alot of this garbage, you probably will miss Mike.
Jm2c
E
![]()
Last edited by TurboBeaver; 10-27-2021 at 01:48 PM.
Bookmarks