I'm not understanding something regarding the LG fitting alignment on the Northland drawings. Fuselage dwg 12183 would appear to show the center line of the LG fittings parallel to the CL of the lower longeron, when viewed from the side. Dwg. 21272 fwd fitting installation, however, shows a vertical dimension of .688 or 11/16" between the CL of the longeron and the center of the LG bolt, and dwg. 12184, rear fitting, shows this dimension as 7/8". This results in a 3/16" difference from front to rear. Is this correct or is there something simple I'm missing?