Does anybody know what the spinner stock number is for putting a Hartzell trailblazer on a cub? Trying to get a trailblazer for an experimental 0360 cub and Hartzell is of little help.
DENNY
Does anybody know what the spinner stock number is for putting a Hartzell trailblazer on a cub? Trying to get a trailblazer for an experimental 0360 cub and Hartzell is of little help.
DENNY
Thanks guys!! I using the information from the manuals and comparing it to the carbon cub I think I got it pretty close. Checking a few more things I will keep you posted.
DENNY
Check with Brian Sutton - he holds the STC for the trailblazers and also has some of the best pricing around on those components. https://www.propilotsinc.com/
FX-3 optionally uses the 80 inch or 83 inch Trailblazer. I posted all the Trailblazer part numbers in a recent thread but here they are again:
83 inch 2-Blade Carbon Fiber Propeller, Standard Hub HC-C2YR-1N/NG8301
80 inch 2-Blade Carbon Fiber Propeller, Standard Hub HC-C2YR-1N/NG8301-3
78 inch 2-Blade Carbon Fiber Propeller, Standard Hub HC-C2YR-1N/NG8301-5
76 inch 2-Blade Carbon Fiber Propeller, Standard Hub HC-C2YR-1N/NG8301-7
I asked on the CC group and was given 106039 as the spinner part number. This checks out as a composite dome part number in Hartzell manual 148. That document does not include the number I was given for the bulkhead which was 106348P. However both part numbers do appear in the price list - https://hartzellprop.com/wp-content/uploads/2021-Price-List.pdf
FWIW my FX-3 has a composite spinner dome and an aluminum bulkhead. I think both have the Harzell part number labels on them but I'd prefer not to have to pull it off again to read them. Unfortunately the photos I have don't show the labels.
Sounds like you have all you need but my EX-3 builder contact added a note so I'll pass it on -
"Part # 106040 is also written on the plate as "spinner Assy." I assume this is for both pieces (composite dome and backplate). It is on the price list link you sent as well. 100% sure these #'s are correct."