Results 1 to 26 of 26

Thread: J-3 tool kit?

  1. #1

    Join Date
    Dec 2017
    Location
    Underberg, South Africa
    Posts
    68
    Post Thanks / Like

    J-3 tool kit?

    Click image for larger version. 

Name:	C340D44D-575C-4945-9938-EA5DB10E82FD_1_201_a.jpg 
Views:	105 
Size:	25.3 KB 
ID:	57253Click image for larger version. 

Name:	6B71BC8A-C56E-4BD7-B199-A6A1CEB01679_1_201_a.jpg 
Views:	100 
Size:	23.9 KB 
ID:	57254Click image for larger version. 

Name:	82490A58-44B7-4F4C-A02B-E89769368BC4_1_201_a.jpg 
Views:	102 
Size:	32.4 KB 
ID:	57255

    Finally got my J3 in the air after a lengthy paperwork debacle with our South African Civil Aviation Association. I was wondering what tools do you guys recommend one keeps in the aircraft? I was going with a couple of screw drivers, plug spanner, spare plug, set of long nose pliers.... anything else?

  2. #2
    Grant's Avatar
    Join Date
    Mar 2002
    Location
    At Work.....
    Posts
    1,906
    Post Thanks / Like
    Looks good

    Hard to go wrong with:
    "screw drivers, plug spanner, spare plug, set of long nose pliers"

    I would add/Substitute:
    Substitute "screwdrivers" for a single screwdriver with multiple bits (Cheap is good enough)
    Vice-Grips
    Knipex Pliers
    Duct Tape
    Letherman(Multi-tool)
    A length of safety wire
    A handfull of Misc Screws and Nuts for the ones you drop in the deep grass.....

    A lot of this depends on what you want to accomplish.... If you're just trying to get home, minimal will do. If you're trying to plan for every enventuality, then nthing you carry will ever be enough...
    Likes Pete Schoeninger, Bill Rusk liked this post

  3. #3
    stewartb's Avatar
    Join Date
    Oct 2012
    Location
    Wolf Lake, AK
    Posts
    6,462
    Post Thanks / Like
    What tools do you use to do normal tasks on the airplane? I can do 90% of what I normally do with my on-board tool kit. Even when in the hangar with a stocked roll-away I usually grab what I need from my go bag.

  4. #4

    Join Date
    Dec 2017
    Location
    Underberg, South Africa
    Posts
    68
    Post Thanks / Like
    Thanks guys, just wanting to make sure there isnt some insiders tip with a specific tool etc. I used to have a share in a twin comanche, one of the vital things was a piece of prestick to prevent nuts falling into the engine bay when re-cowling!

  5. #5

    Join Date
    May 2021
    Location
    Arizona, USA
    Posts
    267
    Post Thanks / Like
    Quote Originally Posted by Grant View Post

    I would add/Substitute:
    Knipex Pliers
    I had no clue what Knipex Pliers were so I looked it up. Knipex is a manufacturer of many tools, including many types of pliers, so that didn't help at all.

    Does "Knipex pliers" have some special meaning in this group? I have lots of different pliers but I never heard of Knipex before I came here.

  6. #6
    Crash, Jr.'s Avatar
    Join Date
    May 2015
    Location
    Anchorage, AK
    Posts
    711
    Post Thanks / Like
    Likes DENNY, Southern Aero liked this post

  7. #7
    stewartb's Avatar
    Join Date
    Oct 2012
    Location
    Wolf Lake, AK
    Posts
    6,462
    Post Thanks / Like
    Throughout the adjustment range the jaws stay perfectly parallel. Very handy tool. I have them in my hangar tools but not in my tool kits.

  8. #8

    Join Date
    May 2021
    Location
    Arizona, USA
    Posts
    267
    Post Thanks / Like
    Thanks! Looks like a very useful tool. I've been "wrenching" for over 50 years and never come across these before.

  9. #9

    Join Date
    Dec 2017
    Location
    Underberg, South Africa
    Posts
    68
    Post Thanks / Like
    Quote Originally Posted by Crash, Jr. View Post
    Never seen these before! What size seems to be the most handy?

  10. #10
    cubdriver2's Avatar
    Join Date
    Apr 2003
    Location
    upstate NY
    Posts
    10,833
    Post Thanks / Like
    Those are great pliers buy only thing on a J3 your going to use them on are axle nuts

    Glenn
    "Optimism is going after Moby Dick in a rowboat and taking the tartar sauce with you!"

  11. #11
    Steve Pierce's Avatar
    Join Date
    Mar 2002
    Location
    Graham, TX
    Posts
    21,180
    Post Thanks / Like
    I have the set Flying Miss Daisey have me many years ago. I don't use them on nuts or bolts but the squeeze rivets, straighten sheet metal and lot of other uses. I use the serrated channel Lock brand on those round axle nuts.
    Click image for larger version. 

Name:	PXL_20210831_133359577.jpg 
Views:	63 
Size:	133.9 KB 
ID:	57305
    Steve Pierce

    Everybody is ignorant, only on different subjects.
    Will Rogers
    Likes bcone1381, wireweinie liked this post

  12. #12

    Join Date
    May 2021
    Location
    Arizona, USA
    Posts
    267
    Post Thanks / Like
    Quote Originally Posted by Steve Pierce View Post
    I have the set
    Looks like you have the set sold by Airframes but there are more sizes available than those and also choices of grip style and steel finish. Perhaps too many choices as I haven't decided which to get (if any).

    I admit to using channel locks on my PA-28 wheel spindle sleeve nuts but the FX-3 is only attacked with the proper pin wrench.
    Likes Scooter7779h liked this post

  13. #13
    Steve Pierce's Avatar
    Join Date
    Mar 2002
    Location
    Graham, TX
    Posts
    21,180
    Post Thanks / Like
    Yes, this is the set I have. They to work well on axles nuts with the flast since they are recessed in when on big tires. They all work like a wrench in a pinch as well or when the SAE nor metric wrench quite fits.
    https://www.amazon.com/9K-00-80-45-U...a-568021556102
    Steve Pierce

    Everybody is ignorant, only on different subjects.
    Will Rogers
    Likes jrussl liked this post

  14. #14

    Join Date
    May 2021
    Location
    Arizona, USA
    Posts
    267
    Post Thanks / Like
    Quote Originally Posted by Steve Pierce View Post
    Yes, this is the set I have. They to work well on axles nuts with the flast since they are recessed in when on big tires. They all work like a wrench in a pinch as well or when the SAE nor metric wrench quite fits.
    https://www.amazon.com/9K-00-80-45-U...a-568021556102
    One of the reviews from that Amazon link -

    "It's Knipex therefore superior quality and durability. As an aircraft engineer I can take apart a whole airplane with these. "

    Now I just got to get me some!

  15. #15
    Steve Pierce's Avatar
    Join Date
    Mar 2002
    Location
    Graham, TX
    Posts
    21,180
    Post Thanks / Like
    They are a nicely made tool that just feels right. However, growing up my Dad would get pretty irate if my brothers or I used Crescent wrenches or God forbid a pair of pliers on anything we worked in so mine have a limited usefulness.
    Steve Pierce

    Everybody is ignorant, only on different subjects.
    Will Rogers
    Thanks Coulee Clipper thanked for this post
    Likes RaisedByWolves liked this post

  16. #16
    mvivion's Avatar
    Join Date
    Jun 2003
    Location
    Bozeman,MT
    Posts
    11,705
    Post Thanks / Like
    In reviewing the suggestions, nobody mentioned a plug wrench. Not much point in carrying a spare plug without a wrench to R and R said plug. I carry said plug socket and a minimal handle…..dunno what they’re called.

    MTV
    Thanks C130jake thanked for this post

  17. #17
    Steve Pierce's Avatar
    Join Date
    Mar 2002
    Location
    Graham, TX
    Posts
    21,180
    Post Thanks / Like
    I made this from a 3/4" swivel socket wrench and a spark plugs socket. Cut the socket shorter and welded it to the socket end of the wrench. Have one in my daily work box and another in my tool bag in the airplane. Not my idea, Mark Englerth came up with it and I really like it. As you can probably tell I am a tool junkie and have been since I was about 12 years old.
    Click image for larger version. 

Name:	PXL_20210831_222743176.jpg 
Views:	73 
Size:	107.4 KB 
ID:	57310
    Steve Pierce

    Everybody is ignorant, only on different subjects.
    Will Rogers
    Likes Brandsman liked this post

  18. #18
    Grant's Avatar
    Join Date
    Mar 2002
    Location
    At Work.....
    Posts
    1,906
    Post Thanks / Like
    Quote Originally Posted by mvivion View Post
    In reviewing the suggestions, nobody mentioned a plug wrench. Not much point in carrying a spare plug without a wrench to R and R said plug. I carry said plug socket and a minimal handle…..dunno what they’re called.

    MTV

    It was called a Plug "Spanner" in the first post.....He must be a silly Britt or South African fella....

  19. #19
    mvivion's Avatar
    Join Date
    Jun 2003
    Location
    Bozeman,MT
    Posts
    11,705
    Post Thanks / Like
    Quote Originally Posted by Grant View Post
    It was called a Plug "Spanner" in the first post.....He must be a silly Britt or South African fella....
    Ahhhh, SO! I assumed the aforementioned “plug scanner” was a term for a gap tester…..

    MTV

  20. #20
    mvivion's Avatar
    Join Date
    Jun 2003
    Location
    Bozeman,MT
    Posts
    11,705
    Post Thanks / Like
    Quote Originally Posted by Steve Pierce View Post
    I made this from a 3/4" swivel socket wrench and a spark plugs socket. Cut the socket shorter and welded it to the socket end of the wrench. Have one in my daily work box and another in my tool bag in the airplane. Not my idea, Mark Englerth came up with it and I really like it. As you can probably tell I am a tool junkie and have been since I was about 12 years old.
    Click image for larger version. 

Name:	PXL_20210831_222743176.jpg 
Views:	73 
Size:	107.4 KB 
ID:	57310
    I like it!

    MTV

  21. #21
    stewartb's Avatar
    Join Date
    Oct 2012
    Location
    Wolf Lake, AK
    Posts
    6,462
    Post Thanks / Like
    Aren’t aircraft plugs 7/8”?

  22. #22
    wireweinie's Avatar
    Join Date
    Aug 2013
    Location
    Palmer, AK
    Posts
    4,080
    Post Thanks / Like
    Lots of plug wires are 3/4'. The socket is a plug socket welded on.

    Web
    Life's tough . . . wear a cup.
    Likes Steve Pierce liked this post

  23. #23
    Steve Pierce's Avatar
    Join Date
    Mar 2002
    Location
    Graham, TX
    Posts
    21,180
    Post Thanks / Like
    The plug leads on the 520 in my 182 are 7/8" so I will make another one for the tool bag in it.
    Steve Pierce

    Everybody is ignorant, only on different subjects.
    Will Rogers

  24. #24

    Join Date
    Dec 2017
    Location
    Underberg, South Africa
    Posts
    68
    Post Thanks / Like
    Quote Originally Posted by Grant View Post
    It was called a Plug "Spanner" in the first post.....He must be a silly Britt or South African fella....
    South Africans.... cant take them anywhere :-p
    Likes Brandsman liked this post

  25. #25
    Steve Pierce's Avatar
    Join Date
    Mar 2002
    Location
    Graham, TX
    Posts
    21,180
    Post Thanks / Like
    Great for those lock tabs on Piper wings and Lycoming pushrod housings.
    Click image for larger version. 

Name:	PXL_20210903_192547645.jpg 
Views:	35 
Size:	50.6 KB 
ID:	57345
    Click image for larger version. 

Name:	PXL_20210903_192549287.jpg 
Views:	35 
Size:	44.7 KB 
ID:	57346
    Steve Pierce

    Everybody is ignorant, only on different subjects.
    Will Rogers

  26. #26

    Join Date
    May 2021
    Location
    Arizona, USA
    Posts
    267
    Post Thanks / Like
    Quote Originally Posted by IainR View Post
    South Africans.... cant take them anywhere :-p
    Whereas we silly Brits get everywhere and some bring our spanners with us. I worked on cars and motorcycles for many years before I came to US. First time in an auto parts store I realized I needed to learn a new language!

Similar Threads

  1. Air tool for cleaning pipe ends prior to welding: Trick Tool 525
    By Speedo in forum Products, Purchases, Reviews & Prices
    Replies: 4
    Last Post: 06-27-2021, 04:55 AM
  2. Cessna tool?
    By mit greb in forum Cafe Supercub
    Replies: 5
    Last Post: 09-23-2011, 11:28 AM
  3. tool kit
    By harleybubba in forum Tips and Tricks
    Replies: 0
    Last Post: 08-18-2004, 04:33 PM
  4. PA-12 Bungee Tool
    By PA-12 Super Cruiser in forum Super Cub Sick Bay
    Replies: 1
    Last Post: 12-31-2003, 10:16 AM

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •