bertievdbunte
Registered User
Teuge, EHTE, The Netherlands
Hi there,
Just acquired my 3rd PA-18 for bannertowing in The Netherlands. Flew it from Portugal back to here and now we are doing a big inspection before putting it to work.
The major thing we found was this trim pulley bracket (see pictures). It is worn big time on both sides of the bracket. And the bolt/axis was sliced of for about 25% its dia !!
Any advice on how to repair the attachment bracket? Or is there no other way but replacing them.
Looking forward for your help and thanks in advance of course.
Regarsd
Bert van de Bunte
Just acquired my 3rd PA-18 for bannertowing in The Netherlands. Flew it from Portugal back to here and now we are doing a big inspection before putting it to work.
The major thing we found was this trim pulley bracket (see pictures). It is worn big time on both sides of the bracket. And the bolt/axis was sliced of for about 25% its dia !!
Any advice on how to repair the attachment bracket? Or is there no other way but replacing them.
Looking forward for your help and thanks in advance of course.
Regarsd
Bert van de Bunte