RVBottomly liked this post
Anyone lose some idle RMPs after installing a Sensenich GA prop? I lost 2-300 RPMs - Enough I had to adjust the idle set screw. I would have thought a lighter prop with comparable pitch would have spun faster.
AK
If it works for you then great, but as an FYI Sensenich doesn’t designate pitch the same as on a std metal prop per se. (Their words not mine)
As I recall the pitch number I used on mine was a couple numbers different than a “comparable” metal prop.
And 2-300 is a big number. Make sure both blades are equal pitch. (I did that once and it wouldn’t even start)
Sent from my iPhone using SuperCub.Org
AK737 thanked for this post
I have not noticed an issue with idle rpm when installed the Sensenich GA prop. Mine is set about 5-600 rpm.
Steve Pierce
Everybody is ignorant, only on different subjects.
Will RogersAK737 thanked for this post
Bookmarks