Herc
Registered User
Big Lake, Alaska
Where do I start... I've just purchased an engine from Ly-con, let the wait begin. Here is my question. I have roughly 25k to spend to go along with this engine upgrade. Currently I'm going with a CGR-30P, new motor mount, sutton exhaust with a rear mounted oil cooler and the heating upgrade. This leaves me with roughly 18k. I'm leaning towards P-Stol flaps, BlackOps suspension (once the STC is approved) and a trig transponder. My question is, should I be looking at anything else; or is my current plan a good one? I'm damn excited to get this new B2B installed as I currently have an O290-D2.