Colorado-Cub
MEMBER
Buena Vista, CO
I would greatly appreciate it if someone could verify a measurement for me?
I am looking for the rough distance from the top of a dynafocal engine mount cross tube back to the firewall. Or, the distance from the firewall to the accessory case to main case mating surface on their Lycoming. Really, anything to help infer engine distance from the firewall would be helpful.
I am most curious about this measurement for an 18, but if there are any PA12 owners that know the distance of their longer O235 engine mount, that would be handy too.
And, yes -- I have the Northland drawings as well as 3 different versions of a Lycoming dynafocal engine mount 3D modeled. My own engine mount appears to be longer than the stock PA18 too which is further adding to the confusion...
Thanks in advance.
-dave
I am looking for the rough distance from the top of a dynafocal engine mount cross tube back to the firewall. Or, the distance from the firewall to the accessory case to main case mating surface on their Lycoming. Really, anything to help infer engine distance from the firewall would be helpful.
I am most curious about this measurement for an 18, but if there are any PA12 owners that know the distance of their longer O235 engine mount, that would be handy too.
And, yes -- I have the Northland drawings as well as 3 different versions of a Lycoming dynafocal engine mount 3D modeled. My own engine mount appears to be longer than the stock PA18 too which is further adding to the confusion...
Thanks in advance.
-dave