Step mod needed for camping trips

Had this beer bottle opener around the hangar for years. Drilled 2 holes on the step and one on the opener. 2 #10 screws and done. Ready for camping. I shall call it the “beerMe” step mod. Maybe I can put tick marks on the step to signify how many beers have been opened by the beerMe mod. Strictly for use post flying.

Post flight handling shows no negative impact to speed or landing qualities.

My step allows one to open multiple bottles at once.

Bottle openers, corkscrews?! Y’all are overthinking it. The good stuff has twist tops.

If you put bottled beers in an icechest a day early, the labels soak off pretty good yet retain a film of the adhesive on the back. You can peel them off neatly and stick them on the side of the airplane, truck, etc. like fighter pilot kills. Don't ask how I know this. It seemed like a good idea about 35 years ago.

Seems like an individual that’ll go unnamed, rhymes with txpacer, did the same thing sticking a beer label on top of one of my flaps where it might go unnoticed;-)