About 1.5 years ago I posted about a 1979 super cub that ground looped in Tok Alaska. We had a collapsed right gear and the right wing was damaged. After tearing down the wing we are looking at replacing fore and aft spar’s, five ribs, center leading edge skin and the two outer sections of false spar. There is other minor damage to repair, some resulting from the 2100 mile trip in a uhaul. I know all the answers I’m looking for are on this forum or the internet, but this forum seems to have the best gouge out there. I’m looking for wing diagrams/schematics and any other blueprints or manuals that will help me get it back together. I have an A&P who will help/supervise time permitted, but I really want to learn to do it. After ordering parts from Univair they told me I have to order the two types of screws individually? Is that normal. We’re going to use steward systems for fabric. Is that a good way to go? Thanks for reading.
R/
jason
R/
jason