skywagon8a
MEMBER
SE Mass MA6
This on page 4: "Once the adhesive has had sufficient time to set (usually 24 hours, longer in a cold environment) it is time to shrinkthe fabric. Apply heat with your hot air gun (never more than 482°F / 250°C) and shrink the fabric until taut andwrinkle free." The adhesive would have been used around the edges.tick on patch is going to work without shrinking it down, really curious.
i know your at the top looking down on everyone, but go to page 3 here and tell me how a s https://betteraircraftfabric.com/flyer.pdf
On page 3 the A4 repair sheet is just a peel off the protection sheet and stick it on. It appears this is for small puncture holes. How big the hole can be using this type of repair would need an explanation from an Oratex specialist. I'll pose this question. Could this A4 repair sheet be used to cover a landing gear V and still be taught? Odds are good, the fabric would not be taught.