• If You Are Having Trouble Logging In with Your Old Username and Password, Please use this Forgot Your Password link to get re-established.
  • Hey! Be sure to login or register!

Float fittings/ stainless control cables

Anchorage, AK
My welder said it’s pretty easy for him to weld on Atlee float fittings. I am going to go ahead and do it on my Super Cub project. Should I also put in stainless control cables? I am changing them anyway. I vaguely remember there being some issue with stainless longevity. Is there anything else to consider float wise for a rebuild.
 
My welder said it’s pretty easy for him to weld on Atlee float fittings. I am going to go ahead and do it on my Super Cub project. Should I also put in stainless control cables? I am changing them anyway. I vaguely remember there being some issue with stainless longevity. Is there anything else to consider float wise for a rebuild.

stainless cables will fray much sooner than galvanized.... so unless you WILL BE ON FLOATS/salt water.. go with GALVaNIZED...
 
Back
Top