• If You Are Having Trouble Logging In with Your Old Username and Password, Please use this Forgot Your Password link to get re-established.
  • Hey! Be sure to login or register!

"Standard" PA-12 fuel tanks finger strainer size

Philly5G

Registered User
England
Can anyone please tell me if the original PA-12 fuel tanks have "standard" size finger strainers in them? i.e. this size https://www.lasaero.com/products/article/K04EAXDL1 "Finger strainers for fuel tank outlets, brass fitting has 3/8” male pipe thread (which fits AN867-3 weldable flange) and 1/4” female pipe thread for valve or fuel line fitting. Screen is 16 mesh brass."?

and I'm guessing that there's one of these on each tank? Left and Right?

Thanks!!

P
 
I usually go with the 1/4 pipe outlet. It’s still a really tight fit to get the hose routed by fuselage.


Sent from my iPhone using SuperCub.Org
 
Lately on experimental stuff I been soldering the finger screen into a brass 3/8 pipe barbed nipple after boring the recess out in nipple for screen. That gives you the shortest combination


Sent from my iPhone using SuperCub.Org
 
Back
Top