Likes Likes:  0
Results 1 to 5 of 5

Thread: Prop flange bushings for Borer Prop

  1. #1
    TVATIVAK71's Avatar
    Join Date
    Jun 2016
    Location
    ANC
    Posts
    138
    Post Thanks / Like

    Prop flange bushings for Borer Prop

    Converting our O-320-B2B with a MT constant speed to a fixed pitch Borer 8243. The MT took 7/16 bushings and Im trying to sort out through some manuals what the right part number would be for the flange that accepts the 3/8 bolts that came with the Borer. Right now Im looking at part numbers 72066(index bushing), 72067 and or 18921(index), 18922 was gonna measure the thickness of the Prop flange and research the lengths of the bushings. Are the part numbers in the Lycoming manual referencing the B2B for 3/8 bolts?

    Next question is when the MT was removed only 4 bushings extended past the face of the flywheel, I was under the impression all six bushings had to extend past the flywheel for the prop to stock on. Which is normal? (maybe I should take a better look under the prop I just removed to see if it would only take four longer bushings). Anyway its late just thought I would see if anyone knew here before I start digging more into it.
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	D179985B-0C4E-43BC-B366-496936CBFA4F.jpeg 
Views:	111 
Size:	199.9 KB 
ID:	49984  

  2. #2
    Steve Pierce's Avatar
    Join Date
    Mar 2002
    Location
    Graham, TX
    Posts
    22,904
    Post Thanks / Like
    You need this information in Lycoming service instruction 1098Q.

    https://www.google.com/url?sa=t&sour...FAmLsu-dK61z7f
    Steve Pierce

    Everybody is ignorant, only on different subjects.
    Will Rogers

  3. #3
    TVATIVAK71's Avatar
    Join Date
    Jun 2016
    Location
    ANC
    Posts
    138
    Post Thanks / Like
    Thanks! I’m thinking that letter/instructions are the way to go.
    Thanks windy thanked for this post

  4. #4
    Steve Pierce's Avatar
    Join Date
    Mar 2002
    Location
    Graham, TX
    Posts
    22,904
    Post Thanks / Like
    Gone both way using the Service Instruction.
    Steve Pierce

    Everybody is ignorant, only on different subjects.
    Will Rogers

  5. #5

    Join Date
    Apr 2003
    Location
    RanchAero Grand Vista, Brooksville
    Posts
    2,671
    Post Thanks / Like
    I sent you a private message.

    Jeff

Similar Threads

  1. Prop Guard on a Borer Prop
    By Steve Pierce in forum Modifications
    Replies: 16
    Last Post: 12-08-2016, 02:51 PM
  2. Prop Flange angle relative to HRL
    By bgriffel in forum Cafe Supercub
    Replies: 2
    Last Post: 10-01-2014, 07:35 AM
  3. lycoming flange prop lugs
    By ron in forum Experimental Cubs
    Replies: 7
    Last Post: 10-17-2013, 02:38 AM
  4. prop position on engine flange
    By pelican-12 in forum Modifications
    Replies: 3
    Last Post: 08-23-2013, 06:50 AM

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •