NunavutPA-12
FRIEND
67.8N,115.1W CYCO Canada
I have a B&C oil filter adapter installed on my O-320. Should I remove the oil screen or leave it in place?
No screen on the B&C adapter. I was referring to the screen in the sump.
Gary - The pressure control I'm talking about is near no. 3 cylinder. I don't think there's one near the oil filter adapter, which is at the top of the accesory case.
Now that I recall - the filter screen WAS removed when I installed the adapter. The Vern-a-therm is still in place.
No screen on the B&C adapter. I was referring to the screen in the sump.
And YES to the Vernatherm.
I have used the B&C filter adapters on a Pitts and two Extras and now on my Tcraft. They replace the pressure side oil screen on the accessory case and require a veritherm if using an oil cooler. Never a problem but did raise the oil temp on my Extra 230.
Jim
Oil temp went up but pressure remained the same.
Jim
Do B&C adapters require a specific gasket? I believe B&C and Casper are different.