Results 1 to 7 of 7

Thread: Caltopo, Geospatial PDF's, and ForeFlight

  1. #1
    cubflier's Avatar
    Join Date
    Nov 2003
    Location
    Palmer, AK
    Posts
    1,294
    Post Thanks / Like

    Caltopo, Geospatial PDF's, and ForeFlight

    As a side effect of another project I'm working on I ran into a ForeFlight capability that I wish Garmin Pilot could do. It is the incorporation of Geospatial PDF's as map overlays. Has anyone tried this on ForeFlight before? I'm new to it but it does look a bit more detailed view than I'm used to.



    It looks promising if it's useable.

    Jerry
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	IMG_0006.jpg 
Views:	64 
Size:	77.6 KB 
ID:	45119   Click image for larger version. 

Name:	IMG_0005.jpg 
Views:	61 
Size:	85.8 KB 
ID:	45120  
    Last edited by cubflier; 10-11-2019 at 02:22 PM.
    If it looks smooth...it might be

    If it looks rough...it is!!
    Thanks tedwaltman1, flylowslow thanked for this post

  2. #2

    Join Date
    Oct 2012
    Posts
    4,551
    Post Thanks / Like

    Caltopo, Geospatial PDF's, and ForeFlight

    Good info! Topo maps were one of my biggest disappointments in Foreflight and one of the reasons I kept GP.

    For comparison, screen shots from my iPhone.

    Click image for larger version. 

Name:	IMG_0327.JPG 
Views:	62 
Size:	338.5 KB 
ID:	45121

    Click image for larger version. 

Name:	IMG_0328.JPG 
Views:	55 
Size:	306.3 KB 
ID:	45122


    Sent from my iPhone using SuperCub.Org mobile app
    Last edited by stewartb; 10-11-2019 at 03:02 PM.

  3. #3
    cubflier's Avatar
    Join Date
    Nov 2003
    Location
    Palmer, AK
    Posts
    1,294
    Post Thanks / Like
    Quote Originally Posted by stewartb View Post
    Good info! Topo maps were one of my biggest disappointments in Foreflight and one of the reasons I kept GP.
    I went with GP for the same reasons. However, the topo shading lacks the detail I wanted. I have bought the topo disk for my 660 which is fine but it would be nice use maps that CalTopo can generate on the ipad as an overlay given the ipads size and resolution. The detail of these Geospatial PDF's are quite amazing compared to the pilots terrain shading. The pictures I posted aren't doing it justice.

    Part of the purpose of this thread was also to give a thumbs up for CalTopo. The mapping capabilities of CalTopo is worth a try for any pilot especially if backcountry skiing is in the mix.

    Click image for larger version. 

Name:	Screen Shot 2019-10-12 at 9.03.49 AM.jpg 
Views:	49 
Size:	276.7 KB 
ID:	45131
    This is photo shows slope angle shading as an overlay on a USGS topo map. To have this combination available in the GP app would be quite meaningful. Another feature in CalTopo that I'm finding useful is the ease at which you can create a detailed route through terrain and export it to a Garmin device. It does a better and cleaner job than the two mapping products (InReach Maps, Basecamp) that Garmin provides.

    Jerry
    Last edited by cubflier; 10-12-2019 at 12:49 PM.
    If it looks smooth...it might be

    If it looks rough...it is!!

  4. #4

    Join Date
    Oct 2012
    Posts
    4,551
    Post Thanks / Like
    I'm playing with Caltopo but it isn't intuitive on a smart phone. I'll try later from a desktop. I agree that in a scale less than 2 miles GP topos aren't good. When I do ground-based stuff I've been using Gaia.

  5. #5
    cubflier's Avatar
    Join Date
    Nov 2003
    Location
    Palmer, AK
    Posts
    1,294
    Post Thanks / Like
    Here is another comparison between Foreflight with a Geospatial pdf overlay vs the Garmin Pilot app in the same area.



    These are linked images so you can see the difference in the terrain detail difference in the two apps. Keep in mind the Foreflight with the overlay will only show the map you have selected and I would imagine there are size limitations to the PDF overlays. Toggling the overlay on and off in Foreflight is quite simple incase you want to fall back the underlying chart for aviation specific information. I did talk to Garmin about the possibility of including this feature and they seemed interested especially since Foreflight is ahead of the game here.

    The colored lines are detailed terrain routes that are divided into one mile segments numerically. Making these types of routes is quick and easy on CalTopo as compaired other options out there. The GPX output that comes from CalTopo imports directly to Garmin devices without any goofy auto-label clutter that is characteristic of some of the other options out there.


    Jerry
    If it looks smooth...it might be

    If it looks rough...it is!!
    Likes flylowslow, TurboBeaver liked this post

  6. #6
    Paul Jackson's Avatar
    Join Date
    May 2011
    Posts
    165
    Post Thanks / Like
    I love the topo maps as an option to review terrain in a given area. Can you point out the link to where you are getting the files and cost?

    I played with the layers feature in Foreflight which allowed me to create a "skin" to place over the Sectional map rather than replace the Foreflight like the topo map does. I made float plane guides for the states of MN and WI with some notes on the lakes and color coding if operations are used. I found the flags I put on each to create a note with that skin are a bit hard on the eyes on a large view but when you scale down in actual use in the plane they aren't that bad. (There is alink under float operations to download the map files I created)

    The sky is the limit with adding data to Foreflight. I am working on scanning and uploading a pdf file that will display the State of MN info page for each airport.

    From Foreflight: Plates & Airport Diagrams (BYOP): The “Bring Your Own Plates” feature allows you to import PDF files that you can access in the Plates view or in the Airports view under the Procedures tab. Files imported this way behave the same as procedure plates and airport diagrams downloaded through ForeFlight, including support for georeferencing if geospatial PDFs are used.

    The State of MN guide has really good intel on cars and restaurants and hotels as well as camping info and airport contacts and should be handy addition to have in the cockpit. I am trying to get this done in the near future.

    I would like to see a sticky file here on the forum where we can upload Foreflight files for other SC.org guys to use. Heck we could even customize a BYOP to include if there is a SC.org guy in the area around an airport if you get in a pickle and need a helping hand.
    Likes cubflier liked this post

  7. #7
    cubflier's Avatar
    Join Date
    Nov 2003
    Location
    Palmer, AK
    Posts
    1,294
    Post Thanks / Like
    CalTopo.com will get you to their site. CalTopo is a map generating tool so you can explore it's features to get the feel of it, then construct your own map set and down load it to Foreflight. There are plenty of youtube tutorials to get familiar with the CalTopo interface. There is a very small learning curve. I would start at CalTopo.com. Orient the map to your location. There is a search block to speed that process. Once you are in your local area then explore the preset layers available. Then customize a map to the look and feel that suits your need. From there you hit print. There are two options that will overlay in Foreflight. They are Geospatial PDF and MBTiles. I would start by printing to a Geospatial PDF. Next step is to copy it to Foreflight via email or iTunes. iTunes needs a connection but is so much easier than emailing files and copying via Foreflights share sheet. Furthermore, you can copy very large files via iTunes, whereas, email provider limitations kick in quite early.

    Once you have done this you just tap the layers icon in Foreflight and you are there. A note about MBTiles. This is the real way to go, however, there is a bit of complexity in understanding exactly what's in the MBTile structure. Ultimately a merge of the MBTile databases is necessary and that's not for everyone I would assume.

    I agree with your comment on a sticky type of repository.

    CalTopo is basically free but if you want to do any real huge map down loads a subscription upgrade is a good idea. Keep in mind that you could do a one time upgrade, make all the maps you want, and be done.

    Here is an example of the MBTile format in action.



    Good Luck and let me know how it works for you.

    Jerry
    Last edited by cubflier; 10-15-2019 at 01:16 PM.
    If it looks smooth...it might be

    If it looks rough...it is!!
    Likes moneyburner liked this post

Similar Threads

  1. Boeing Buys Foreflight
    By Steve Pierce in forum In The News
    Replies: 40
    Last Post: 04-25-2019, 04:16 AM
  2. Foreflight 8
    By Eddie Foy in forum Cafe Supercub
    Replies: 30
    Last Post: 10-08-2016, 12:24 PM
  3. Foreflight Pro 4.4 vs WingX Pro7
    By WindOnHisNose in forum Cafe Supercub
    Replies: 26
    Last Post: 08-15-2016, 02:00 PM
  4. Your Foreflight Wish List
    By Barnstormer in forum Products, Purchases, Reviews & Prices
    Replies: 56
    Last Post: 03-17-2016, 09:44 PM
  5. Foreflight update.
    By bigrock in forum Member to Member
    Replies: 3
    Last Post: 11-02-2011, 09:19 AM

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •