• If You Are Having Trouble Logging In with Your Old Username and Password, Please use this Forgot Your Password link to get re-established.
  • Hey! Be sure to login or register!

Which STC for PA18 Gear on a PA12

evroosevelt

Registered User
Wilsonville, AL
I am in the middle of changing my PA -12 gear to a PA18 gear I had done this to another PA-12 20 or 30 years ago but since all that info left my feeble brain 20 or 30 years ago so I am here asking questions. Which of the 2 STCs are easier to work with? I do have a copy of the Borer/ Atlee Dodge STC which probably means that is the one I used 20 or 30 years ago all though I don't remember making those fwd. attach fixture that is in there STC. How does the Crosswinds STC handle that problem? Any insight into undertaking would be very helpful.
Thanks
EV
 
Most guys buy the fittings from Atlee. You should have a -12 cabane on hand to verify fit before you weld them.
 
Last edited:
Back
Top