Page 2 of 2 FirstFirst 12
Results 41 to 54 of 54

Thread: Where would you have a super cub worked on?

  1. #41
    Eddie Foy's Avatar
    Join Date
    Dec 2014
    Location
    South Florida
    Posts
    3,753
    Post Thanks / Like
    Just as long as you didn't spit out your dentures!

    Quote Originally Posted by wireweinie View Post
    Hey Eddie, you finally made me laugh out loud.

    Web
    "Put out my hand and touched the face of God!"
    Likes RaisedByWolves liked this post

  2. #42

    Join Date
    Jan 2007
    Posts
    2,486
    Post Thanks / Like
    TED
    If you are trying to find a GOOD place to get it done obviously you are a year or two late in starting the process. As far as getting cub flying for next summer, pick what really needs to be done and do that one part first. Wings/motor/fuselage break the project down into three or four parts and do them as time allows. Hopefully you have not taken a knife to the fabric on the wings and fuselage at the same time. It will be a rat cub for a few years but it will be a summer flying plane and not just holding down a set of sawhorses for the next two years. I did the bottom end of my motor and painted the front metal this past winter, will do a bit of fabric work soon but was able to fly ALL SUMMER!! Just another way to skin the cat.
    DENNY
    Likes mike mcs repair liked this post

  3. #43

    Join Date
    Aug 2019
    Posts
    36
    Post Thanks / Like
    Hey, I’ll be first to say I don’t know mike, but I’ve gotten quite a lot of advice and lots of pm for guys that want the work. I just dont do well with the sarcasm. If you’ve got something constructive to say I’m all ears that’s why I’m here and I really appreciate the guys that pm me and the guys with advice. But for someone to say there’s no way and I’m being “unrealistic!!” And then throw more fuel to the fire on top of that. Well I don’t need that here. So again thanks to all those that responded with advise and offers of help, the smart asses I don’t need or want.
    Likes flyrite liked this post

  4. #44
    wireweinie's Avatar
    Join Date
    Aug 2013
    Location
    Palmer, AK
    Posts
    4,071
    Post Thanks / Like
    Quote Originally Posted by Eddie Foy View Post
    Just as long as you didn't spit out your dentures!
    Nah. But I had to re curl my moustache.

    Web
    Life's tough . . . wear a cup.
    Likes Eddie Foy liked this post

  5. #45
    flyrite's Avatar
    Join Date
    Mar 2013
    Location
    Lyons,GA
    Posts
    508
    Post Thanks / Like
    Quote Originally Posted by Farmer Ted View Post
    Hey, I’ll be first to say I don’t know mike, but I’ve gotten quite a lot of advice and lots of pm for guys that want the work. I just dont do well with the sarcasm. If you’ve got something constructive to say I’m all ears that’s why I’m here and I really appreciate the guys that pm me and the guys with advice. But for someone to say there’s no way and I’m being “unrealistic!!” And then throw more fuel to the fire on top of that. Well I don’t need that here. So again thanks to all those that responded with advise and offers of help, the smart asses I don’t need or want.

    Ted, Got a guy who is known by reputation in the acro community for complete rebuilds of show quality jobs. Has done 2 for me including my bush plane. Started my last one in mid summer, delivered it early spring next year. Very reasonable price and fast. You only pay for materials as the build progresses. Labor collected at completion!
    pm me if ya want his contact information.
    Last edited by flyrite; 10-11-2019 at 10:55 AM.

  6. #46

    Join Date
    Mar 2008
    Posts
    412
    Post Thanks / Like
    I think someone nailed it when they highlighted the difference between "restoration" and "Inspect / Repair as Necessary". One last caution would be that it will always be a whole new ballgame when the skin comes off. Either a "Wow, this is near perfect" surprise...it could happen...or a "Holy moly, there's a lot to do here" sort of surprise.

    Without wanting to fan the flames, I suspect most good tube and rag shops are booked out quite a ways and, based on my non-internet life and some of the work I do writing nasty letters and such, I'd be leery of anyone that promises a hard deadline for work on tube and rag Pipers without seeing the skin off...whether that deadline is 3 months or 3 years.

  7. #47
    Bill Rusk's Avatar
    Join Date
    Jan 2003
    Location
    Sandpoint, Idaho
    Posts
    5,470
    Post Thanks / Like
    I would offer another caution. Those shops that are not really into Super Cubs, who don’t frequent this website will quite probably leave you with a few significant gaps in your restoration. The guys that are on this website know all of the tricks we have learned and all of the little things that can be done to turn your super cub into a high-end airplane. The shops that are not on this website are simply going to rebuild it “as is” and things like attaching the seatbelts to the floor, reverse dogleg, X brace,etc may be overlooked.

    I have helped a couple of people look for, and buy, super cubs and I have seen this on several occasions. They think because they recovered the airplane and put a new engine on it it’s worth 200,000 because that’s what they see on barnstormers. Then when you start asking detailed questions about the modifications you find out they don’t know anything about Super Cubs and all the possible modifications and the airplane is simply not worth anywhere near what they are asking because they did not make the appropriate improvements during the restoration.

    If it is a certified super cub, and you want a really nice one, it’s going to have well over 20 STC’s.
    This is somewhat depending on your mission and what you want. Perhaps what you really want is an original super cub and don’t care about all the modifications. But if you give it to a shop that does not know Super Cubs and tell them you want a really first-rate plane and restoration you may not get what you’re asking for.
    Hope this helps,


    Bill
    Very Blessed. "It's not an obsession, it's a passion"

  8. #48
    mike mcs repair's Avatar
    Join Date
    Aug 2004
    Location
    chugiak AK
    Posts
    11,773
    Post Thanks / Like
    Quote Originally Posted by Farmer Ted View Post
    Hey, I’ll be first to say I don’t know mike,... I just dont do well with the sarcasm.
    I was NOT being sarcastic


    Sent from my iPhone using SuperCub.Org mobile app
    Thanks eskimo77 thanked for this post

  9. #49

    Join Date
    Oct 2012
    Location
    Wolf Lake, AK
    Posts
    6,450
    Post Thanks / Like
    Like most businesses I'm struggling to find new hires. A buddy sums it up well. The guys you want are already working. The guys not working? You don't want to hire them.
    Last edited by stewartb; 10-14-2019 at 05:54 PM.

  10. #50

    Join Date
    Jan 2017
    Location
    Utah/Alaska
    Posts
    340
    Post Thanks / Like
    I just started working a a flight school last month as their only IA, we are bringing in kids fresh out of A&P school because we cannot find experienced mechanics. One kid is green but willing to learn and another was trying to look up how to find top dead center in the manual because he didnt know how...I am hoping to find someone to mentor, I pay cash and its a weekend thing when I work on customers airplanes outside of my 9-5 job.

    As of right now I have gone through 3 apprentices in the last 3 years, one felt it was beneath him to remove panels and to clean parts like tail wheels so I can inspect and reassemble, another started sniffing a girl and ran off, and the last thought he was worth 60K a year working weekends. I am hoping to find someone who can specialize in antique aircraft. What I get frustrated with is the fact I am using my tools, supplies and certificate, and apprentices think they are worth a fortune.

    Then you have to deal with customers who want to argue about actually doing an annual and fixing things. Why do some owners feel it is necessary to jeopardize my certificate? I am not an expert on all things aviation, but I do try to be honest and I have traveled to help someone out. Being in the business is challenging and its mostly people who make it so. Tim

    Oh and I have been helping a customer build a set of ailerons for a '41 Tcraft, new spars, leading edges and a lot of corrosion clean up. We started 6 months ago and I am hoping to get the leading edges on this weekend, he did all of the clean up and corrosion removal, it was stupid crap like getting real spar varnish and resorcinol (2 month for non expired resorcinol to build wood spars) that was a very time consuming problem. Its crap like that which can eat up a lot of time. If you are just replacing parts, and covering, it is easy.
    Last edited by astjp2; 10-24-2019 at 07:12 PM.
    Thanks BC12D-4-85 thanked for this post

  11. #51

    Join Date
    Jul 2021
    Posts
    2
    Post Thanks / Like
    I'm the fortunate recipient of an Homebuilt Experimental PA-11 Light Sport Cub. I have done some improvements like a fresh overhauled engine and an ACME Suspension. The issue I am having is with my trim of the tail. Seems it trims forward, but does not stay trimmed in the higher speed range. Back trim or slower landing trim works well. I am looking for a knowledgeable Cub technician that can go over the whole tail assembly and repair and trim as required. I am in Las Vegas, NV, but can deliver within a reasonable distance.

  12. #52
    Cub Special Ed's Avatar
    Join Date
    Oct 2016
    Location
    MT/SD
    Posts
    562
    Post Thanks / Like
    Quote Originally Posted by Cub Special Ed View Post
    Belle Fourche Flight Center Belle Fourche, SD.
    Black Hills Aero Spearfish, Sd.
    Baker Air Service Baker, Mt.
    I have to revamp my last statement to just be black hills aero in spearfish, sd and Meggars in baker, mt after i flew a pa11 that bell fourche aero had just done an anual on. Bungees were so bad when you crawled out the wing stayed down. Tw assemply was wore plumb out, and there was a broken bracket on a horz stab flying wire. Thats just the things we caught. So after seeing some of that stuff i suggested the owner take it right to ted in spearfish to redo the annual. I cannot recommend belle aero now after seeing that. May be a fluke, but never the less. Hope this helps.
    "There are 3 kinds of men. The one that learns by reading. The few who learn by observation. The rest of them have to pee on the electric fence for themselves." Will Rogers

  13. #53
    C130jake's Avatar
    Join Date
    Sep 2012
    Location
    Minnesota
    Posts
    431
    Post Thanks / Like
    Quote Originally Posted by hlb View Post
    Dan Byker did mine in 2004. Good work. I bought the plane in 2010, so no contact with him until then.Dan Byker

    • Shop: 712-552-2648
    • Cell: 712-441-5121
    • Hawarden, Iowa
    I second Dan, he rebuilt the PA12 we have and fixed a wingtip this spring after some hangar rash during float changeout.

    Jake.


    Sent from my iPad using SuperCub.Org mobile app
    Likes 180Marty liked this post

  14. #54

    Join Date
    Jul 2021
    Posts
    2
    Post Thanks / Like
    Thank you

Similar Threads

  1. Replies: 8
    Last Post: 07-14-2015, 01:06 AM
  2. Replies: 1
    Last Post: 06-15-2015, 10:43 PM
  3. darwinism almost worked
    By eskflyer in forum Cafe Supercub
    Replies: 5
    Last Post: 05-29-2015, 02:38 PM
  4. Super Cruiser Elevator/stick/system/ is super Cub type
    By Fortysix12 in forum Cafe Supercub
    Replies: 6
    Last Post: 01-14-2012, 10:07 AM
  5. Super Cub Advertising at the Super Bowl
    By Bob Breeden in forum Cafe Supercub
    Replies: 16
    Last Post: 02-19-2011, 09:53 AM

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •