• If You Are Having Trouble Logging In with Your Old Username and Password, Please use this Forgot Your Password link to get re-established.
  • Hey! Be sure to login or register!

Pa-12 Seat Removal?

daedgerton

PATRON
Arlington, VA
Need to remove the seat on my PA-12 to get under the floorboards... My 12 has flaps... Sullivan STC SA578AL. The flap handle bridges over to the seat, how do I remove the flap handle so I can lift the seat straight out? Is there some type of sleeve I need to remove?

Thanks...
 
There is a liner tube inside. Usually a cotter pin through the two to keep the liner from sliding out. I have a tool to remove the liner tube on a Cessna 180 tail stinger that works on the flap liner tube. Found the cotter pin missing in a PA18 Tango Cub that had been modified with flaps. The liner tube was stick out into the fabric on the outside of the fuselage.
IMG_20190512_181721.jpg

IMG_20190512_181657_1.jpg

IMG_20190512_182027.jpg
 

Attachments

  • IMG_20190512_181721.jpg
    IMG_20190512_181721.jpg
    34.3 KB · Views: 1,122
  • IMG_20190512_181657_1.jpg
    IMG_20190512_181657_1.jpg
    50.1 KB · Views: 1,169
  • IMG_20190512_182027.jpg
    IMG_20190512_182027.jpg
    95.4 KB · Views: 1,131
Back
Top