Results 1 to 6 of 6

Thread: Rpm data out of a super cub 150 with a sensenich 74dm6-0-56

  1. #1

    Join Date
    Oct 2018
    Posts
    23
    Post Thanks / Like

    Rpm data out of a super cub 150 with a sensenich 74dm6-0-56

    Hi everyone,

    looking for someone running a sensenich 74dm6-0-56 on there super cub 150. I am only getting maybe 2500 rpm out of mine at level full throttle flight. Just talked with sensenich and he said that did not sound right to him. Is anyone getting more rpm out of theres?

    Thank you!

  2. #2
    JDWilliams's Avatar
    Join Date
    Aug 2018
    Posts
    17
    Post Thanks / Like
    Running that motor-prop combo on my PA-12. 2500RPM on takeoff. Normally max’d out around 2600 RPM WOT level flight at 1000MSL.


    Sent from my iPhone using SuperCub.Org

  3. #3

    Join Date
    Jan 2007
    Posts
    1,656
    Post Thanks / Like
    Could be you RPM gauge get one of them electronic ones you set on the dash and check it.
    DENNY
    Likes skywagon8a, cubpilot2 liked this post

  4. #4

    Join Date
    Jun 2007
    Location
    New Zealand
    Posts
    486
    Post Thanks / Like
    From memory, with the 56" pitch prop, 2500 rpm is 75% at sea-level-ish, like 1000 ft. They get along with that prop; 115 mph at 2500.

    Andrew.

  5. #5

    Join Date
    Dec 2006
    Location
    Meanwhile,...
    Posts
    4,998
    Post Thanks / Like
    This is for a 74 56, was supplied with my SC from the factory.

    Click image for larger version. 

Name:	17DBC095-6BCE-4D0A-9B91-4844FB581545.jpg 
Views:	91 
Size:	103.8 KB 
ID:	44463
    Last edited by OLDCROWE; 09-14-2019 at 11:47 AM.
    Remember, These are the Good old Days!

  6. #6
    Steve Pierce's Avatar
    Join Date
    Mar 2002
    Location
    Graham, TX
    Posts
    18,641
    Post Thanks / Like
    Been to long since I ran the Sensenich on my 150 hp. I am breaking in my 160 and it runs 2650 on take off with two different 56" props and shakes more than my Borer. Burns about a gallon to a gallon and a half more fuel per hour and is 5-8 mph faster than my Borer. Can't wait to get these cylinders broken in and my Borer back on my Super Cub.
    Steve Pierce

    Everybody is ignorant, only on different subjects.
    Will Rogers
    Thanks bush4 thanked for this post
    Likes Brandsman liked this post

Similar Threads

  1. Sensenich 74DM6
    By arizcub in forum Member to Member
    Replies: 2
    Last Post: 05-01-2007, 09:12 PM

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •