Results 1 to 4 of 4

Thread: Elevator cable tension spec

  1. #1

    Join Date
    Sep 2018
    Posts
    4
    Post Thanks / Like

    Elevator cable tension spec

    Can anyone tell me what the proper tension for the elevator cables should be on a Pa-18 I can't find it in the erection manual I have .

  2. #2
    www.SkupTech.com mike mcs repair's Avatar
    Join Date
    Aug 2004
    Location
    chugiak AK
    Posts
    10,477
    Post Thanks / Like
    not slack... best I know of...

    piper didn't offer much direction on the early planes... never seen the erection manual...

  3. #3
    Steve Pierce's Avatar
    Join Date
    Mar 2002
    Location
    Graham, TX
    Posts
    18,811
    Post Thanks / Like
    I use 62+/-2 per this service bulletin.
    Attached Files Attached Files
    Steve Pierce

    Everybody is ignorant, only on different subjects.
    Will Rogers
    Thanks itsrob64 thanked for this post
    Likes itsrob64 liked this post

  4. #4

    Join Date
    Sep 2018
    Posts
    4
    Post Thanks / Like
    Thanks , Ya I laughed when I saw the Erection manual ,But that is what the military called it when they published it .

Similar Threads

  1. Elevator Spring Tension
    By mgberry in forum Member to Member
    Replies: 1
    Last Post: 06-01-2012, 09:39 PM
  2. elevator cable tension
    By iamcamper in forum Experimental Cubs
    Replies: 3
    Last Post: 01-22-2010, 02:31 PM
  3. Rigging Elevator Bungee Tension
    By Mark Lund in forum Member to Member
    Replies: 4
    Last Post: 11-28-2005, 12:39 AM

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •