Hi, a question about the two-part pulley bracket that is bolted to the front spar strut attach assembly.
Wondering if the pulley assembly should be free to rotate to find the right angle under tension, or torqued up in position.
If torqued up, is there any specific angle or should it just be aligned and tightened with the cable in place under tension?
Thanks, Bill
Wondering if the pulley assembly should be free to rotate to find the right angle under tension, or torqued up in position.
If torqued up, is there any specific angle or should it just be aligned and tightened with the cable in place under tension?
Thanks, Bill