• If You Are Having Trouble Logging In with Your Old Username and Password, Please use this Forgot Your Password link to get re-established.
  • Hey! Be sure to login or register!

Aileron pulley bracket

Billy-250

Registered User
Andover UK
Hi, a question about the two-part pulley bracket that is bolted to the front spar strut attach assembly.

Wondering if the pulley assembly should be free to rotate to find the right angle under tension, or torqued up in position.
If torqued up, is there any specific angle or should it just be aligned and tightened with the cable in place under tension?

Thanks, Bill
 
Hi, a question about the two-part pulley bracket that is bolted to the front spar strut attach assembly.

Wondering if the pulley assembly should be free to rotate to find the right angle under tension, or torqued up in position.
If torqued up, is there any specific angle or should it just be aligned and tightened with the cable in place under tension?

Thanks, Bill

Kinda snug but able to find its proper spot


Sent from my iPhone using SuperCub.Org mobile app
 
Back
Top