Matt 7GCBC
Registered User
Northwest
When you do the Kenmore Kit, you need a non-linear rudder centering system. If you had an old model rudder centering system and the aileron rudder interconnect these needed to be removed.
I am needing the cable and springs and clamps for the aileron rudder interconnect. If you have these sitting in a box in the hangar, please call me 208 867-6757. Thanks in advance. Matt
I am needing the cable and springs and clamps for the aileron rudder interconnect. If you have these sitting in a box in the hangar, please call me 208 867-6757. Thanks in advance. Matt