I am looking for a deep throat 12-30 inch air rivet squeeze. I have checked the yard store and also Brown's does anybody know where i could find something like this
I am looking for a deep throat 12-30 inch air rivet squeeze. I have checked the yard store and also Brown's does anybody know where i could find something like this
Might I ask why you need such a thing? Usually a rivet that far from the edge would be dealt with using a bucking bar and a rivet run, or possibly with a C-frame. If you need to dimple a rivet hole that far from the edge there is a dimpler available that works with a pop rivet gun. Just curious.
Not looking for a squeezer but for a pair of tight space 3/32 dies to fit a standard sqeezer for dealing with rivets under the rib cap strips on a PA18.
Are such things available and if so where would I go for them?
Not looking for a squeezer but for a pair of tight space 3/32 dies to fit a standard sqeezer for dealing with rivets under the rib cap strips on a PA18.
Are such things available and if so where would I go for them?