Steve Pierce
BENEFACTOR
Graham, TX
Bill, I don't like powder coating myself. Saw an Airframes fuselage after it sat in a hanger at Broadhead for a few years and all the places I use an airbrush on to make sure there is paint everywhere had little rust spots. Epoxy primer and polyurethane top coat work for me. If you use powder coating use a reamer to clean the hole and put grease in the hole or roll the paper you wrap steel internal engine parts in and insert it in the hole till assembly.
I spoke with Airframes yesterday and they are working on certifying an A model fuselage.
I spoke with Airframes yesterday and they are working on certifying an A model fuselage.