• If You Are Having Trouble Logging In with Your Old Username and Password, Please use this Forgot Your Password link to get re-established.
  • Hey! Be sure to login or register!

3" Extended Gear, 31" Tires...will it fit in the T-hangar?

Beach Bum

Beach Bum

Registered User
Acworth, GA
Anyone have a hangar clearance height requirement for the above? Need to know if another hangar is in my future. Mines a standard height "T" hangar.
 
There is a standard t hangar height? I have been in five or six different ones and they have all been way different.


Sent from my iPad using Tapatalk
 
i believe somewhere around 11 feet is "standard" at least thats what our two are.

Also im pretty sure at 11 ft a cub on anfibs will fit.

Tom
 
I have lost antennas on cubs in the hangars I have had with smaller tires. My last short t was around 7 feet


Sent from my iPad using Tapatalk
 
I'll stop by the hangar tomorrow and get my "standard" numbers together. Doing the math, I'll add 2 1/2" for the gear and 11 1/4" for tires (31's). Need 13 3/4" additional clearance at the tips.
 
If it won't fit in the hangar, I have the address to send them too :lol:
 
You must log in or register to reply here.

Similar threads

B
New ski dolly alternative -need advice
Replies
29
Views
24K
JPachl
JPachl
WindOnHisNose
3 inch gear extension, 8.5 tires
Replies
14
Views
4K
JimC
J
E
Certified extended gear Cubcrafters V.S. Atlee or other
Replies
14
Views
5K
cubfxr
cubfxr
MaxMotoring
Big tires on PA-12
Replies
2
Views
2K
MaxMotoring
MaxMotoring
L
J-3 in Fort Worth area?
Replies
4
Views
2K
Lasater
L
Back
Top