Thanks Thanks:  0
Results 1 to 13 of 13

Thread: Supplier for 25x11x4 Tubes...

  1. #1

    Join Date
    Dec 2008
    Location
    Billings, MT
    Posts
    20
    Post Thanks / Like

    Supplier for 25x11x4 Tubes...

    Just got myself a nice set of 25x11x4 Air Wheels and want to get my hands on a replacement set of tubes for them. Can someone send me in the direction of a supplier for the tubes? I've called Desser and they don't have them and couldn't get through to Wilkerson. Greatly appreciate your assistance!

  2. #2
    d.grimm's Avatar
    Join Date
    Oct 2004
    Location
    toledo, oh
    Posts
    474
    Post Thanks / Like
    8:50x6
    Valve stem extension.
    What are you putting them on?
    Dave

  3. #3

    Join Date
    Dec 2008
    Location
    Billings, MT
    Posts
    20
    Post Thanks / Like
    '40 J3. Are you saying I can use the 8.50x6 tubes in these?

  4. #4
    Nathan K. Hammond's Avatar
    Join Date
    Nov 2002
    Location
    Danville, KY DVK
    Posts
    477
    Post Thanks / Like
    That's what we're using, with out the valve stem extension.

    nkh

  5. #5

    Join Date
    Dec 2008
    Location
    Billings, MT
    Posts
    20
    Post Thanks / Like
    I spoke with Wilkerson after receiving the initial post response and the fellow I spoke with (Mr. Wilkerson, can't remember his first name) said the only concern there would be possibility of folds in the tube and future issues. Experienced any issues with these tubes? By the way, Wilkerson does recap these tires...at $540 per tire. Appreciate the responses.

  6. #6
    Clay Hammond's Avatar
    Join Date
    May 2002
    Location
    Rhinebeck NY (NY94)
    Posts
    1,297
    Post Thanks / Like
    Wilkerson re-capped for us. Did a great job given the condition we sent them in. No issues with the 8:50 tubes so far. They've been holding for about eight months now. Running about 8lbs I think, grass only. No slipping either, Sharpie marks are still lined up perfectly. Shoot me or Nate an email if you need help with adapters.






  7. #7

    Join Date
    Dec 2008
    Location
    Billings, MT
    Posts
    20
    Post Thanks / Like
    Thanks for the reply. PM sent on the adapters. Email not working for me until I get back home. One the road for business currently. Thanks!!!

  8. #8

    Join Date
    Oct 2012
    Posts
    406
    Post Thanks / Like
    Is it possible to purchase the adapters now?

  9. #9

    Join Date
    Apr 2018
    Posts
    55
    Post Thanks / Like
    Looking for these adaptors! Thanks.

  10. #10
    S2D's Avatar
    Join Date
    May 2002
    Location
    Montana
    Posts
    4,253
    Post Thanks / Like
    Quote Originally Posted by Dakota View Post
    Looking for these adaptors! Thanks.
    Airglass used to make them too. There's a new method of making things out of plastic. Including guns. Maybe you could copy someone's.

    Sent from my E6810 using Tapatalk
    Likes cubdriver2 liked this post

  11. #11
    cubdriver2's Avatar
    Join Date
    Apr 2003
    Location
    upstate NY
    Posts
    10,597
    Post Thanks / Like
    Quote Originally Posted by S2D View Post
    Airglass used to make them too. There's a new method of making things out of plastic. Including guns. Maybe you could copy someone's.

    Sent from my E6810 using Tapatalk

    Dang, great idea. You are smarter then you look

    Glenn
    "Optimism is going after Moby Dick in a rowboat and taking the tartar sauce with you!"

  12. #12
    S2D's Avatar
    Join Date
    May 2002
    Location
    Montana
    Posts
    4,253
    Post Thanks / Like
    Quote Originally Posted by cubdriver2 View Post
    Dang, great idea. You are smarter then you look

    Glenn
    That must put me at high genius level ?

    Sent from my E6810 using Tapatalk

  13. #13
    NC2252M's Avatar
    Join Date
    Jul 2005
    Location
    Upstate,NY
    Posts
    135
    Post Thanks / Like
    Call desser and tell them you want a DC3 tailwheel tube, they are perfect. I don't remember the size but are great, same 90deg valve stem also.

Similar Threads

  1. Steel supplier
    By jse18 in forum Cafe Supercub
    Replies: 3
    Last Post: 05-04-2010, 10:22 PM
  2. Door handle supplier
    By jrussl in forum Products, Purchases, Reviews & Prices
    Replies: 2
    Last Post: 10-19-2006, 12:14 PM

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •