behindpropellers said:Just make some long nuts out of brass stock. The ends will not get corroded that way.
Tim
Luke_theDrifter said:behindpropellers said:Just make some long nuts out of brass stock. The ends will not get corroded that way.
Tim
This is the craziest thing I've heard of!
behindpropellers said:Luke_theDrifter said:behindpropellers said:Just make some long nuts out of brass stock. The ends will not get corroded that way.
Tim
This is the craziest thing I've heard of!
Probably need to get a life then.
tamarack said:I have noticed the after-market nuts are softer, tend to round out and are more prone to sticking than the Lycoming nuts. But they are cheaper in the short run.
Vickie
What would be wrong with using red loctite on the studs? Just asking.
Luke, The small Continentals use brass exhaust nuts.
I agree. The ones that Spruce sells are made for Superior. I get mine from Aviall and they are factory Lycoming and seem to be of better quality.