Search results

He also Needs An original cowling and Spinner

The Chrome Pieces Surrounding the "Cluster"

Our -12 has the same door system, done on field approval, a great compromise between a full gullwing and an original door.

A customer has come to us after an unfortunate incident with his 1940 J5A, After the crash the owner wants to go as original as possible, however the J5 Crusier Instrument Panel Trim is nonexistent, Is there a source for reproduction or does anyone have a set or a lead on some? An Example Thanks

What Are My Options For A Left-hand door ? Also What is The Backseat Throttle Setup Like? Thanks

Thanks very much, also I shot over to your YouTube acc. and saw your left hand door throttle, is that STC'd ?

Hello Everyone, In short, we have inherited his PA-12, this is the same PA-12 that was mentioned in my last forum post... Still in pieces and still in need of repair, What do you recommend we do ? The aircraft already has 160hp, flaps, VG's, and a full PA-18 control system. Also we are...

really resurrecting and oldie here, but can he still be contacted or are these STC's available somewhere? SDAirService.

Good Question The Aircrafts Floats were destroyed by the prop and were bent in half from the impact, the floats rigging tore into the floats and we responded to the crash with about 1/3 of each float to spare. the fuselage had about 25 bends and the aircraft did in fact spread about 3/8" we...

I assume these are readily available STC's also, I this aircraft has the swing out mount.

SD Air Service, Is Currently rebuilding a PA-12 crash (floats) the craft already has a 160hp but we will need a new prop etc. the fuselage is completely torn down and one wing is trash and struts should be inspected, The aircraft already has flaps and extended gear. Basically wondering what we...

Thanks Everyone, We Are In VT, Being A Maintence Shop Our Own Projects Usually Move Pretty Slowly, As Do My Responses To Forum Post I Guess.If Passing Through You Should Stop By At KRUT. You Probably Wont Find Me At The Shop Unless Its After 3pm But My Father Is Always There. I Will Try To Get...

Hello Everyone! My name is Cameron Draper I Work Occasionally With My Father-Scott Draper- At The Shop. We've had many projects laying around over the years and we've finally decided SUPER CUB. We got a super cub fuselage and are putting together wings now(establishing parts) and so forth...

Hello Everyone! My name is Cameron Draper I Work Occasionally With My Father-Scott Draper- At The Shop. We've had many projects laying around over the years and we've finally decided SUPER CUB. We got a super cub fuselage and are putting together wings now(establishing parts) and so forth...