• If You Are Having Trouble Logging In with Your Old Username and Password, Please use this Forgot Your Password link to get re-established.
  • There is no better time to show your support for SuperCub.Org than during our annual calendar campaign! All the details are HERE

Search results

  1. A

    Oversize tailwheels

    Resurrecting an old thread with this question… 1- Is the stock spring (ABI 3 leaf) arched correctly for tall gear/big tires/BBW out of the box? 2-How would a Husky spring improve the geometry/ride? Other mods required? Paperwork requirement for a Husky spring on a PA-12? My spring was...
  2. A

    Oil leak somewhere near the carb

    The thing I like about the Lowe’s version is how short it is. It will fit around the back of my engine whereas a lot of other black lights are too long.
  3. A

    Oil leak somewhere near the carb

    After you clean up, run a few minutes and grab a black light and look for the new oil. It will glow. https://www.lowes.com/pd/Kobalt-Blacklight-51-Uv-LED-Flashlight-Aa-Battery-Included/5013922183
  4. A

    LED landing/taxi lights

    Is there a difference between a bulb and a light fixture with regard to CAR 3? ie the newer LED lights are integrated with the fixture. thanks Marty
  5. A

    Federal A2500A ski installation

    Drawing 11R262
  6. A

    Federal A2500A ski installation

  7. A

    PA-12 turtle deck?

    Looks a little “custom”…
  8. A

    PA-12 Wing incidence modification

    Longer gear effectively let you touch down slower without hitting tailwheel first. AOI mod changes geometry between wing and thrust line. Sent from my iPhone using SuperCub.Org
  9. A

    Federal A2500A ski installation

    I have the Atlee Dodge sleeve that mates with both surfaces. Working on the spacers/washers order. Sent from my iPhone using SuperCub.Org
  10. A

    Federal A2500A ski installation

    The gear leg is an Atlee Dodge +3 gearleg. Sent from my iPhone using SuperCub.Org
  11. A

    Federal A2500A ski installation

    So I stopped by Atlee Dodge and Justin told me that they do own both Federal and Fluidyne ski. He said they are working on kits for the Federal but did not expect to have any rubber bushings. He said a solution he has seen is to turn a bushing from EDPM to replace the rubber and its liner...
  12. A

    Need help with cowl fastener

    Southco #82 https://www.aircraftspruce.com/catalog/hapages/82seriessouthco.php Sent from my iPhone using SuperCub.Org
  13. A

    Aeroski R-2800

    Sent from my iPhone using SuperCub.Org mobile app
  14. A

    Aeroski R-2800

    6.00x6. You may have to have a different set of brakes to swap so that the brake profile won’t interfere with the skis. Sent from my iPhone using SuperCub.Org
  15. A

    Federal A2500A ski installation

    I have a set of Federal A2500A skis that will be going on a PA-12 with 3” extended, 1.25” axle PA-18 landing gear soon. I am looking for pictures of the washers, spacers and bushings used to install the skis. Can’t seem to find a clear image of an installation guide or drawing for them either...
  16. A

    Lycoming 0-320-A2B Running Rough & Hot

    If you decide to replace the system, I have a Vetterman exhaust system for an o320. I changed over to an o360. Less than 100 hrs on the Vetterman system. Sent from my iPhone using SuperCub.Org
  17. A

    Gear Leg Cover?

    What’s the benefit, perceived or real, to keeping the gear legs covered? Sent from my iPhone using SuperCub.Org
  18. A

    For Sale: Exhaust system 320

    Modified Sutton is available from Rubbert Aviation (10#s total) as well as a pma’d 10 row oil cooler. Sent from my iPhone using SuperCub.Org
  19. A

    Standard Airglas vs. XL Sized Pods

    Randy does make one. 16# was the weight I think. It was on my previous bird. An epoxy seam where the hinge was attached came apart. Randy repaired it no charge. I flew to him with the pod. Sent from my iPhone using SuperCub.Org
  20. A

    Aluminum or steel struts

    Steel and Aluminum are same price. So if you have to buy struts… I bought Aluminum. Ran into an issue though. You have to swap out the clamps on the jury struts. PA-12 strut clamps were rusted and deformed into the horizontal tubes. Had to fabricate the horizontal tube. Sent from my iPhone...
Back
Top