• If You Are Having Trouble Logging In with Your Old Username and Password, Please use this Forgot Your Password link to get re-established.
  • Hey! Be sure to login or register!

Search results

  1. Hardtailjohn

    Boeing Factory Tour - Anyone done it?

    I got to go to Everett in 1995 with a friend that worked as a lead on the 747 not long before he retired. He took about half a dozen of us, and we packed a lunch. We were in there from about 9am through 4pm. We got to go all over the building and in the aircraft, including the absolute maze of...
  2. Hardtailjohn

    how cold is it where your at?

    January 13, 2024. I was born and raised right here, and never seen or heard of this cold before.....and neither has my friend that has lived here all his life too. I got out for 9 years and went to the B'ham, WA area....and NEVER got warm in the winter! We were about -45 yesterday and -35...
  3. Hardtailjohn

    Rudder service bulletin 1379 2nd December 2022

    Good point....I wasn't thinking about that. JH
  4. Hardtailjohn

    Rudder service bulletin 1379 2nd December 2022

    Are my weak old eyes deceiving me, or is the PA-12 left out of that mess? John
  5. Hardtailjohn

    Maule thread

    I take care of an M4-220C and an M5 that's been converted to an M7. The fit and finish may be a bit "utilitarian" but I really do like them both. Simple and effective, just the way things should be! JH
  6. Hardtailjohn

    Verner Radial?

    Right off the bat, it's not a geared engine, so the reliability goes way up in many ways. I wouldn't be at all worried about it, personally. JH
  7. Hardtailjohn

    Verner Radial?

    From everything I've gathered, talking to people who have them, Verner and Rotec are at the opposite ends of the dependability spectrum. I've yet to hear anybody complain about the Verner that has one, but I'm not in the loop on much anymore. Quite a few horror stories about the Rotec. That's...
  8. Hardtailjohn

    Verner Radial?

    It all depends on how long it's been sitting. An hour or so, we never did pull through. Overnight, we always pull through. The Russian radials were absolute pigs about leak down. The problem is that most of the round engines still running, are well worn, unless they're being worked, and a...
  9. Hardtailjohn

    Stewart System Paint

    I did a video on it a while back.... you can do as good or not good as you want.... https://youtu.be/DPULa4Eebz0?si=-0EFbKlQ2oGw5TMm
  10. Hardtailjohn

    how cold is it where your at?

    It's all relative, Steve! When I was in NW WA, 30 was awful cold.... I'm noticing that as my hair turns more grey, it seems to bother me more and more too!! It was 0 this morning.... JH
  11. Hardtailjohn

    how cold is it where your at?

    We got about 6" of snow in the last 2 days and it's been right at 20 in the morning. They were predicting single digit lows but I see they raised it up to 15 or so...then we're back to the 40's for the weekend. Gonna be a muddy mess, but we'll take it! John
  12. Hardtailjohn

    Vinyl wrap?

    I think it looks great and have seen some really amazing stuff done with it. I've also seen a cub covered with blue poly tarps....didn't look so great but flew in and had been flying..... but bottom line is what the feds say...and I'm agreeing with them less and less every day, but they still...
  13. Hardtailjohn

    Vinyl wrap?

    I know the last time I spoke with a fed about it, he sent me this..... JH
  14. Hardtailjohn

    Cowboys and Cubs

    Surprisingly, there's a lot more cattle thefts than you'd imagine. A very close friend who is a brand inspector for Montana, showed me some statistics a few years ago and I was floored! John
  15. Hardtailjohn

    Cowboys and Cubs

    We're all in...but this green grass is pretty phennominal!!! I've got places of 8" of new green grass on my meadows! John
  16. Hardtailjohn

    To de-wing or not to de-wing, what should I consider?

    Save your backs and damage to the airplane and just get a sheetrock jack to hold the wings up while you take them loose. Sheetrock jacks don't get tired. JH
  17. Hardtailjohn

    Cutting Access Panel

    If it's covered with synthetic fabric, melt it open with a soldering gun. That was it'll seal the edge and offer a bit more strength. Then build a cover for the hole and attach with PK screws. Paint to match. JH
  18. Hardtailjohn

    Favorite fabric safe adhesive?

    "Cecobond" is what "Ekobond" used to be called. When we bought the rights and developed the system, all the products had the "Ceco" prefix. "Eco" came about when Stewarts purchased the system. John
Back
Top