Search:

Type: Posts; User: DENNY

Page 1 of 20 1 2 3 4

Search: Search took 0.14 seconds.

  1. Too many variables to say. How much time is spent...

    Too many variables to say. How much time is spent out in the sun, it’s a plane mostly in the hanger with the ropes in the plane, is the rope treated gently and not tied to sharp edges, I have had the...
  2. Replies
    9
    Views
    508

    One place I tend to be careful and use a torque...

    One place I tend to be careful and use a torque wrench is anytime I am going into cast or machined part with a bolt. Having to pull a head off because you striped out threads really sucks! DENNY
  3. Thread: Extended Gear

    by DENNY
    Replies
    25
    Views
    9,931

    As far as steps go, I would say you have several...

    As far as steps go, I would say you have several things to think about. Stuff like what is your Personal size (long legs or short ones), same questions for passengers, age/flexibility of pilot...
  4. Replies
    17
    Views
    722

    Call the ship breaking company. They could make...

    Call the ship breaking company. They could make some coin on that tow if they did it right.
    DENNY
  5. Replies
    9
    Views
    508

    https://www.supercub.org/forum/archive/index.php/t...

    https://www.supercub.org/forum/archive/index.php/t-41198.html Old thread. DENNY
  6. Replies
    6
    Views
    634

    I would assume that they do have control over...

    I would assume that they do have control over there operational area. Just pull over to transient parking to fuel. DENNY
  7. Replies
    23
    Views
    1,160

    You need to look around for a better IA!! DENNY

    You need to look around for a better IA!!
    DENNY
  8. Replies
    35
    Views
    3,469

    Dog When it comes to insurance it is not just...

    Dog
    When it comes to insurance it is not just you it is everyone standing next to you that is included!!! I know of several High buck experimental aircraft that needed major rebuilds within the...
  9. Thread: And so it begins

    by DENNY
    Replies
    162
    Views
    35,135

    This is what I found on it in 43.13BNOTE: Never...

    This is what I found on it in 43.13BNOTE: Never weld over a previously brazed joint.a. Brazing requires less heat than welding and can be used to join metals that are dam* aged by high heat. However,...
  10. Replies
    22
    Views
    2,535

    It is not a light weight sump but the Superior...

    It is not a light weight sump but the Superior high flow sump is what I will be using on my 0360
    DENNY
  11. Replies
    7
    Views
    571

    Downwash from the ride under the helicopter +...

    Downwash from the ride under the helicopter + forward flight G force with static blade (no stability from normal in flight motion). Just a guess. DENNY
  12. Replies
    38
    Views
    5,049

    During the build could they just move the drain...

    During the build could they just move the drain off to the side so in case of a leak it does not fill the pod? I think they are are 4 inch wider than a cub so you should have lots of room on the...
  13. If it flys fine it might be best left alone (the...

    If it flys fine it might be best left alone (the enemy of good is better). Depending on pilots sill level the plane may need a major recover in the next few years and it can be fixed at that time. ...
  14. Replies
    65
    Views
    17,899

    When you consider the weight. Remember they do...

    When you consider the weight. Remember they do not need a tank cover or bottom!! So compare that to any other tank option. Pretty sure they are equal to or lighter than Dakota 25 gal tanks with...
  15. Replies
    7
    Views
    571

    I bet if you set the skis up with less wheel...

    I bet if you set the skis up with less wheel penetration and laid a strip in with several touch and go passes it would have worked. Letting a strip set for overnight and freeze really helps. But...
  16. Replies
    36
    Views
    1,423

    Sounds like a lot of effort but once you have a...

    Sounds like a lot of effort but once you have a template and system I bet you could do that splice in very little time. Looks like the plate in the spar splice kit so parts might have been on the...
  17. I usually land with full or close to full nose up...

    I usually land with full or close to full nose up trim so I tend to leave it here. If you know it is going to blow it is a good time to think about just how you want to set it for situation that...
  18. I was looking through some posts and I would say...

    I was looking through some posts and I would say a midshipman knot would be the best description. Most of us put that lower hitch in the final knot. A taught-line hitch is a sliding knot that does...
  19. Replies
    8
    Views
    614

    Johnny What happens if you get rid of the 15...

    Johnny
    What happens if you get rid of the 15 lbs of ballast? What is the max weight on the MOAC?
    DENNY
  20. I am glad Scooter and Andy made it to the...

    I am glad Scooter and Andy made it to the presentation they both have a lot more time working in real big winds than I do. Interesting to see all 3 of us carry pretty much the same gear and never...
  21. A few things I forgot to mention. I always mark...

    A few things I forgot to mention. I always mark my duckbills with some kind of tape so the next guy/gal can use them. I have also found if you see a set of tracks somewhere that look like a strip...
  22. I usually recommend no covers in the Summer, Just...

    I usually recommend no covers in the Summer, Just more chance for them to beat up the wing. I carry full mesh with lift blocks when I travel just for wind protection if needed. I have a hanger so...
  23. Replies
    54
    Views
    2,486

    I agree it is a pilot experience issue. For new...

    I agree it is a pilot experience issue. For new pilots one thing to remember is the plane really doesn't care it is on tar, cement, gravel or grass. So just because your CFI has claimed that the...
  24. I found an old post and pics on the plane. Nice...

    I found an old post and pics on the plane. Nice looking plane and would do OK in warm weather smooth strips. Not really ready for Alaska (5-10 grand of stuff would fix that) But that would be for...
  25. Replies
    23
    Views
    909

    I think Jay at Javron should have it. Owner...

    I think Jay at Javron should have it. Owner produced part.
    DENNY
Results 1 to 25 of 500
Page 1 of 20 1 2 3 4